Examples of using Kinematic viscosity in English and their translations into Hungarian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Programming
-
Official/political
-
Computer
Ν: Kinematic Viscosity(m2/s).
Square foot per second, Kinematic viscosity.
Kinematic viscosity of mm 2/sec.
Chemistry: density, dynamic and kinematic viscosity, mineralization?
Kinematic Viscosity at 40°C Min cSt.
Measurement is done with 20℃air-free water. kinematic viscosity of mm2/sec.
Kinematic viscosity is above 10 cSt at 80°C.
The instrument will automatically calculate the kinematic viscosity of the specimen.
Measuring kinematic viscosity has never been so easy.
The following provides the conversion between dynamic and kinematic viscosity.
Kinematic viscosity is above 10 cSt at 80oC.
(b) If it is a hydrocarbon and has a kinematic viscosity≤20.5 mm2/s, measured at 40 °C.
(1) The kinematic viscosity shall only be determined for fluids.
The instrument is also inaccord with SY/T5651"Technical Condition for Petroleum Products Kinematic Viscosity Bath".
Convert Kinematic viscosity, Square inch per second logo.
This European Standard in general applies to products having a kinematic viscosity not exceeding 8 mm2/s at 20 °C, or 5 mm2/s at 40 °C, e.g.
Kinematic viscosity and calculation of dynamic viscosity(ISO 3104);
For the fast determination oft he kinematic viscosity of medium to low viscosity fluids.
Displays kinematic viscosity at process temperature and temperature-compensated according to ASTM D341.
The Operating Terminal(OT) and the Remote Operating Terminal(ROT) are flexible evaluation units for the Anton Paar Smart Sensors used in viscosity measurement(L-Vis 510)for dynamic and kinematic viscosity and in CO2 measurement for beverages(Carbo 510) such as beer, wine or FABs.
It is suitable to determine kinematic viscosity of liquid petroleum products Newton….
The kinematic viscosity of the oil is determined at temperatures of 40 and 100 degrees, and is measured when passing a special curved tube- a viscometer.
Therefore, most of the viscosity scrappingindicators are specified as 100° C kinematic viscosity change range does not exceed 20% -25%, there are also provisions not to exceed the SAE viscosity grade of the oil.
You can measure the kinematic viscosity of your lubricant in the first cell at 40 °C, while the second cell measures your sample at 100 °C at the same time.
In addition to kinematic viscosity and density, SVM 3001 Cold Properties determines the cloud and freeze points from the same sample.
HZYN-1301 automatic kinematic viscosity tester The kinematic viscosity is the measure of the internal friction force when the liquid flows under the action of gravity, and its value is the ratio of the dynamic viscosity to the density at the same temperature, which is one of….