Examples of using Compactflash memory in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Step 4 Pull the CompactFlash memory card out of its slot.
Step 2 Press the ejector button next to the CompactFlash memory card.
This ejects the CompactFlash memory card part-way out of its slot.
Step 2 Press the ejector button next to the CompactFlash memory card.
CompactFlash memory cards are sensitive to electrostatic discharge(ESD) damage.
The photo below illustrates how close you can get to the subject,in this case a CompactFlash memory card.
Step 2 Insert the CompactFlash memory card into the slot until it is fully seated.
The following example demonstrates how close you can get to the subject,in this case a CompactFlash memory card.
Caution Do not remove a CompactFlash memory card from the chassis while it is being accessed.
The following image illustrates how close you can get to the subject; in this case,a weather-beaten CompactFlash memory card.
To install a CompactFlash memory card, perform the following steps(see Figure 8-3).
Caution To prevent damage to the ejector mechanism, the ejector button must remain fully seatedwhen not being used to eject a CompactFlash memory card.
Place a removed CompactFlash memory card on an antistatic surface or in a static shielding bag.
Caution To prevent damage to the ejector mechanism, the ejector button must remain pressed all the way in(flush against the bezel)when not being used to eject a CompactFlash memory card.
To remove a CompactFlash memory card from the chassis, perform the following steps. See Figure 8-2.
With its fast data rates and reliable performance, the SanDisk Ultra CompactFlash Memory Card helps you get the most out of your camera,camcorders and other devices that support CompactFlash memory cards.
Removing the CompactFlash memory card from the router while flash memory is being accessed can cause data corruption and erratic operation.
Note If the ejector button is projecting from the panel after you insert the CompactFlash memory card, remove the CompactFlash memory card, press the ejector button until it clicks, and reinsert the CompactFlash memory card.
CFast 2.0 is a CompactFlash memory card variant, with the CompactFlash Association having announced the specification last year, boasting speeds of up to 600 MB/s through a SATA interface.
CompactFlash MMC Memory Stick™ SD.
This document describes installing and replacing CompactFlash(CF) memory cards in Cisco 1941 integrated services routers.
Its main product line consists of DRAM modules, USB drives,USB hard drives and memory cards in CompactFlash and Secure Digital formats.
Its main product line consists of DRAM modules, USB drives,USB hard drives and memory cards in CompactFlash and Secure Digital formats.
There are many different kinds of flash memory cards, such as CompactFlash and Secure Digital(SD) memory cards.
NAND Flash architecture is one of two flash technologies(the other being NOR)used in memory cards such as the CompactFlash cards.
Supports all Windows-compatible hard disks, removable drives, memory cards, USB Sticks, CompactFlash, and most digital cameras.
An External card reader is a device plugged on a USB Port,used to access the data on a memory card such as a CompactFlash(CF), Secure Digital(SD) or MultiMediaCard(MMC).
It was launched in the summer of 1995 to compete with memory cards of other types such as CompactFlash, MiniCard, and PC Card.