Examples of using Pump element in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Beka Pump Element.
The lubrication pump should be stop while install or remove the pump element.
Grease Pump Elements.
The pump element can be removed after the grease piston is separated from the drive wheel.
Product: SKF Pump Element.
SKF Pump Element Dimensions.
The head of element piston meets on the pressure ring, then moving the pump element at the direction of vertical position(See Drawing B).
Beka Pump Element Dimensions.
Precisely stroke of piston delivery,strictly dimensions fitness between components Lincoln Pump Element Introduction Lincoln pump element is designed to match the element[…].
Lincoln Pump Element Products Advantage.
Pump element is used for lubrication grease pump as parts of the pump, as grease or oil feeding injector, pressurized the grease or oil to the hose.
Precisely fitness of pump element, strictly testing before delivery.
The DDB Pump element should be equipped with our original DDB pump series.
If removal the pump element, be contrary to the above steps.
Beka pump element is replaced to the Beka lubrication pump, as part of pump replacement.
Secure motor and pump elements together, and join flow lines and aquariums.
The pump element is used for delivering the lubricant to each lubrication point or distributing the grease or oil to each lubrication pipes.
Please check the below picture of Lincoln pump element principle which shows the eccentric is driven by the electric motor, the piston of pump element will operation like below two stage.
The pump element piston moves out while met the flat surface of eccentric shaft in the DDB Pump, the oil or grease was pressurized into the element chamber.
Then the eccentric shaft turns to convex surface, the pump element piston is forced to push on and pushing the element seat to lift up, releasing the grease or oil into the element chamber, the steel ball was pressurized up, transferring the medium to the tube.
SKF pump element is designed to replace the element of SKF lubrication grease pump, as for pump replacement and maintenance.
DDB Pump element is the part for multi-point DDB lubrication pump as pump element replacement and pump maintenance parts.
Lincoln pump element is designed to match the element of Lincoln lubrication grease pump, in order to replace and maintain its grease pump. .
This pump element is the part for used for the electric lubrication grease pump of DDRB-N, ZB series, to absorb the grease or oil and pressurized it into grease tubes.
There are several pump elements of different flow rate and two kinds of SKF pump element with spring piston return or without spring and with position piston driven.
To install the pump element, first pull the working piston 1 out about 30mm, place it horizontally in the mounting screw hole, and lift the working piston 1 up to about 30。degrees.
To install the pump element, the piston should keep extended partially and just have an angle approximately 30 degrees, insert the piston into the bore of pump housing(See Drawing A).
Precisely fitness of pump element, strictly testing before delivery SKF Pump Element Introduction SKF pump element is designed to replace the element of SKF lubrication grease[…].
We offered various pump elements such as Lincoln pump element, Sicoma pump element, SKF pump element, Beka pump element and our pump, Hudsun pump elements as replacement.
The SKF pump element with spring is the standard element mostly selected in many working applications, but without spring and with position piston driven is used for extremely working environments, such as too cold(Lower to -30 °C).