Examples of using Reference lines in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Reference lines help pinpoint findings vertically.
After drawing the lines, use a compass anddraw a circle half an inch within the reference lines.
These reference lines should be adjusted on a regular basis.
Give detail to your drawing respecting the proportions dictated by the reference lines you sketched before.
In 3D the reference lines may not be on the selected entities.
As a general rule,the S-RoC should not spend more than 5% of the time above or below the reference lines.
Horizontal reference lines are also plotted at these levels as visual aids.
The fast settling, self-leveling pendulum gives you accurate point and reference lines almost instantly.
However, the reference lines must be drawn manually around the extreme areas of the RoC.
After drawing the lines, make use of a compass anddraw a circle one-half inch inside the reference lines.
Most oscillators have set reference lines to indicate the overbought and oversold areas.
H pencils are recommended for this part, butyou may want to use harder pencils if you want to avoid your reference lines being seen in the final drawing.
Some traders draw their own reference lines for oscillators that have predefined reference lines, such as the 30 and 70 lines of the RSI.
As you can see, we are starting to define the structure of the mesh and the shape of the head,much as a traditional artist would use reference lines to sketch out a head.
However, for some unbound oscillators you need to determine the upper andlower extremes over a relatively long period and draw the reference lines so that the oscillator only spends about 5% of the time beyond the reference lines.
Special function 1 car revering distance reference line(optional.
Adjust the reference line as necessary.
The arrow simply connects the reference line to the joint or area to be welded.
The reference line becomes the foundation of the welding symbol.
The direction of the arrow has no bearing on the significance of the reference line.
To take a level shot,use a reference line, such as the horizon.
A reference line often used in discussing the airfoil is the chord line, a straight line drawn through the profile connecting the extremities of the leading and trailing edges.
The reference line or starting point, the Prime Meridian, was determined to be the transit circle at the Royal Observatory in Greenwich, London.
Another reference line, drawn from the leading edge to the trailing edge, is the mean camber line. .
Create a reference line by lining up the theodolite horizontally with a tall landmark within easy view.
When weld symbols are placed on both sides of the reference line, welds must be made on both sides of the joint(view C.
This will be our reference line to make sure that everything in the drawing is symmetrical.
In view A the weld symbol is on the lower side of the reference line that is termed the arrow side.
Since the late 19th century, the Prime Meridian at Greenwich has served as the reference line for GMT.
Also, notice that the symbols are placed on the same side of the reference line as the weld symbol.