Examples of using Section size in English and their translations into Indonesian
{-}
-
Computer
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
Set section size.
Warning:%s exceeds section size.
Turning ram ram section size mm×mm 320 T type ram 380 T type ram.
A wonderful means to shed some weight is to watch section sizes.
Cross section size.
Physical propery compared with common steel posts with same section size;
Or water quenched depending upon section size and intricacy. Cool in Air.
The relative section sizes suggest approximate relative proportions of each of the food groups to include on a healthy plate.
Q235 srewed steel plate as side and rear guardrail, section size 100mm×50mm, 530mm above ground 3.
Tempering within the range 150 °C- 200 °C will give optimum corrosion resistance and maximum hardness-up to 54 HRC depending upon section size.
While the feed section size about 98 cm long, 57 cm wide and 47 cm deep.
This kind of fence post enjoys an improved rate of 30% in its mechanical property andphysical propery compared with common steel posts with same section size;
Grinding ram ram section size mm×mm 180X180 eight square ram 180X180 eight square ram.
Often also see golfers use a flat swing motion because of their body's characteristics limiting their swing flexibility range,such as their chest and section size in the middle.
It is believed that a dramatic increase in section size over the past 30 years plays an important role in the obesity epidemic.
For section sizes D/T<15(circular) and(B+H)/2T<12,5(square and rectangular) the minimum elongation is reduced by 2.
It is also common to see golfers adopt a flat swing motion due to characteristics of their physique that limitthe range of their swing flexibility, such as their chest and mid section size.
In addition, because of small wall section size, the space of this house can increase 5~8% compared with traditional structure.
List resources with details If SECTION is given, only list resources in this section If PATH is given,only list matching resources Details include the section, size and compression.
For thicknesses> 3 mm and section sizes D/T< 15(round) and(B+H)/2T< 12,5(square and rectangular) the minimum elongation is reduced by 2.
Product Description I beam Mainly divided into ordinary beams light beams low alloy lightbeams Ordinary beams light beams because the section size are relatively high narrow so make it on the application range is very limited Beams should be used according to the requirements of design drawings We have our own lab….
So, for concrete posts section size should not be less than 400 mm for masonry not less than 600 mm for masonry 380 mm if it is above ground level, and by 250 mm when used with zabirkoj bandaging technique.
Compared with other conveying equipment,screw conveyor has the advantages of small section size, good sealing performance, stable and reliable operation, multi point loading and unloading, safe operation and easy maintenance.
Because of the relatively high and narrow section size, the ordinary steel beam and the light steel beam have a large difference in the moment of inertia of the two main sleeves.
Aluminium bubble level tool is made of aluminiumblack plastic end cover on both ends box level section size 50 20 mm material is lacquered aluminium 1mm and plastic end caps The level with strong magnetic and rubber end caps to protect against….
Ordinary beams, light beams, because the section size are relatively high, narrow, so make it on the application range is very limited. Beams should….
I-shaped steel, whether ordinary or light,has relatively high and narrow section size, so the inertia moments of the two principal axles of the cross-section are quite different, so it can only be directly used to bend the members in the plane of their webs or to form lattice members.