Examples of using Self-tapping in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Self-Tapping Thread Insert.
They are fixed to the floor by self-tapping screws.
Self-tapping with cutting slot.
High precision custom self-tapping thread insert from us.
Four self-tapping screws Ø 3,5 x 40 mm for the supports.
To fix, you can use screws, self-tapping screws.
Four self-tapping screws Ø 4 x 50 mm for pedestal and stage.
The lower wooden frame is assembled using self-tapping screws or nails.
High precision self-tapping threaded inserts for plastic.
Then assemble the structure, attaching the plywood to the bars with self-tapping screws.
Two self-tapping screws Ø 3 x 10 mm for diaphragm and mirror.
To assemble the cell frame, galvanized self-tapping screws 70 mm long are used.
Four self-tapping screws Ø 3,5 x 20 mm for the clamp of supports.
It can be repeated dis-assembly, avoiding the self-tapping screws slide wire problems.
Tags: self-tapping screws drywall nail round head self-tapping screw.
The thread protection of screw hole oflow-strength material can use 302 self-tapping thread insert.
High precision self-tapping threaded inserts for plastic Contact Now.
Remote control rack, 3M foam sponge glue,M4 double-headed self-tapping screws, φ6 expansion tube, battery, manual.
The new self-tapping silicone tape takes only a few minutes to heal.
The fasteners produced by the company include self-tapping screw, screw, step and environmental protection screw, screw, etc.
If the self-tapping screws are used as accessories, the fastening is made from the back side.
It is recommended to fix polycarbonate sheets using self-tapping screws with rubber hats so that no harmful moisture penetrates into the building.
Self-tapping screws offer a particular advantage where occasional disassembly may be necessary for maintenance or repair.
For fixing these brackets, self-tapping screws(on top of wood) or dowel nails(when the base is brick or concrete) are used.
Hot Tags: self-tapping inserts with three cutting bores, manufacturer, factory, wholesale, manufacturer direct sale, with ISO certification.
When it is necessary to close the joints or caps of self-tapping screws, dry plaster is applied on a plaster basis, although some masters prefer to use ready-made pastes in buckets.
The self-tapping screws or rivets are used to fix the color plate on the support(such as the purlin), and the penetrating fixed is divided into the wave pin.
AC arc welding machine: electric screwdriver, self-tapping screwdriver, electric screwdriver, permanent magnet DC screwdriver, brushless DC screwdriver, impact wrench, electric wrench.
There are 4 self-tapping screws in each side and total 8 self- tapping screws in both sides.
Changling is a famous Self Tapping Inserts factory with manufacturer direct sale products and ISO certification,welcome to wholesale wire self-tapping inserts with three cutting bores from us.