Examples of using Surface set in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Surface Set Diamond Bits.
Impregnated And Surface Set.
Design: Surface Set, Impregnated, face Discharged.
Type: Impregnated and surface set.
Surface set bits have excellent adaptability in wide range of formations.
The Bits could be impregnated or surface set.
Surface set reaming shells in all common DCDMA sizes are a stock item.
The Bits could be impregnated or surface set.
HQ3 NQ3 Natural Geological Surface set diamond core drilling bit, rig drill bits.
The Bits could be impregnated or surface set.
Surface set diamond bit is mainly recommended for drilling soft to hard formations.
Unforeseen side effects begin to emerge,forcing prior traumas to the surface, setting inner demons free.
Generally speaking, surface set diamond bit can provide satisfying penetration rate.
The inside diameter of the casing shoe bitis not set with diamonds sometimes(surface set Type) and flush with the inside diameter of the casing.
Surface set diamond bit is produced from a single layer of natural diamond setting on the surface of bit crown with hard matrix.
We have impregnated diamond type, surface set type, electroplated diamond type, T.C. type, PCD type and TSP type in following sizes.
Surface Set Diamond BitsThe surface-set diamond bits are mainly used for drilling relatively complete strata(or formations) of medium hardness and high hardness.
Concerning its packing, the surface set diamond bits are first packaged by cartons, and then the carton-packaged diamond bits will be packed again by standard plywood boxes.
Yaheng Surface set Diamond Core Bits are mostly suited to soft formations or using low powered drills, as they operate more effectively than impregnated bits at low surface speeds.
Surface Set Diamond BitsThe surface-set diamond bits are mainly used for drilling relatively complete strata(or formations) of medium hardness and high hardness. Its matrix surface….
The natural diamond grain on surface set core bit are large and self-sharpening easily, in order to protect the exposed diamond grains, the rotary speed of surface set core bit should be lower than the Impregnated Core Bit.
Surface set bits are still a favoured alternative for softer formations, or in highly abrasive ground where the balance in an impregnated bit between matrix erosion and diamond wear would be upset by the aggressive rock conditions.
It includes eight interactive sections- Modeling, Rigging, Surfaces, Sets and Camera, Animation, Simulation, Lighting and Rendering.
In aircraft, a V-tail or Vee-tail is an unconventional arrangement of the tail control surfaces that replaces the traditional fin andhorizontal surfaces with two surfaces set in a V-shaped configuration when viewed from the front or rear of….
Designed with a V-tail(sometimes called a Butterfly tail or spelled Vee-tail) is an unconventional arrangement of the tail control surfaces that replaces the traditional fin andhorizontal surfaces with two surfaces set in a V-shaped configuration when viewed from the front or rear of the aircraft.
In aircraft, a V-tail or Vee-tail(sometimes called a butterfly tail or Rudlicki's V-tail) is an unconventional arrangement of the tail control surfaces that replaces the traditional fin andhorizontal surfaces with two surfaces set in a V-shaped configuration when viewed from the front or rear of the aircraft.
A hard disc is an electromagnetically charged surface or set of discs that record data in concentric circles known as tracks.