Examples of using Total current in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
Total current distortion rate≤5%.
First we find the expression for the total current i0.
The total current through the surface is then.
Impedance in a parallel R-C-L circuit equals the voltage divided by the total current.
Total current capacity measures 213,419 passengers and 11,356 cars.
In a parallel circuit,the voltage across each of the components is the same, and the total current is the sum of the flowing through each component.
The total current is the sum of currents flowing through each element.
Toward the end of the drop life, there is little change in the surfacearea which diminishes the contribution of capacitance changes to the total current.
You need to know the total current, or you won't be able to solve for total resistance.
GOAL 385 produces uniform bright andfine-grained deposits with excellent uniform thickness distributions over the total current density and temperature ranges up to 35°C.
You are limited to the total current capacity of your shore power pedestal or your generator capacity.
When circuit elements are connected in parallel, the total resistance is significantlyless than that of the element having the least resistance, and the total current is equal to the sum of the currents in the individual branches.
The result is a total current phase-angle somewhere between the inductor and capacitor currents. .
Note that the lagging current, IL of the inductor would have caused the total current to have a lagging phase somewhere between(Itotal) and IL.
Note that the total current(Itotal) is in phase with the applied voltage(Vtotal), indicating a phase angle of near zero.
The power of an electromagnet can be modified by modifying the total current it receives, whereas, the permanent magnets have fixed magnetic strength.
Because the total currents Nnin contribute to Φm it also follows that Lm, n is proportional to the product of turns NmNn.
To make a selection section forpower cables need to independently determine the total current of all electrical appliances, to lay down the result and divide by 220.
Moreover, that total current(Itotal) was forced to be in-phase with the total applied voltage(Vtotal), by the calculation of an appropriate capacitor value.
And if everything is more or less clear with the lighting network,we calculate the total current of the lamps powered from each switch, then there may be questions with sockets.
Total current holy mosque has minarets 9 pieces of fruit 8 single minaret at the entrance to the mosque and minaret 1 single in the southwest Ka'ba and flanked by 9 dome.
(2) is illustrating a two dimensions boundary where the total currents entering the closed surface is equal to the total current leaving the surface.
Because the potential is changing during the drop lifetime(assuming typical experimental parameters of a 2 mV/s scan rate and a 4 s drop time, the potential can change by 8 mV from the beginning to the end of the drop), the charging of the interface(capacitive current) has a continuous contribution to the total current, even at the end of the drop when the surface area is not rapidly changing.
Examine the relationship between the total current and the partial currents, and between the total resistance and the partial resistances, in a parallel connection.
The long term technical potential of windenergy is believed to be five times the total current global energy production, or 40 times current electricity demand, assuming all practical barriers were overcome.
Premium Performance: Dual-USB wall charger output with total current 5V/2.1A and input with 100-240V enables you to charge two mobile devices simultaneously at high speed.
The total power delivered to a resistanceelement must be determined using the total current through or the total voltage across the element and cannot be determined by a simple sum of the power levels established by each source.
The total power delivered to a resistivecomponent must be determined using the total current through or the total voltage across the component and cannot be determined by a simple sum of the powers produced by the sources independently.