Examples of using Write head in English and their translations into Indonesian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Ecclesiastic
A Read Write head moves over it.
Pass under the read/write head.
The read/write heads stop at the track.
Each track had its own read/write head.
A read/write head hovers above the rotating platter reading and writing information.
This drive has three platters and six read/write heads.
The read/write head is used to detect and modify the magnetization of the material immediately under it.
The data of your drive platter is read and write by the read and write head.
Whereas, a HDD uses a mechanical arm with a read/write head to move around and read information from the right location on a storage platter.
A hard drive contains a head actuator, read/write actuator arm,read/write head, spindle, and platter.
With disk drives, once the disk read/write head reaches the proper placement and the data of interest rotates under it, subsequent data on the track are very fast to access.
A typical hard drive has two electric motors,one to spin the disks and one to position the read/write head assembly.
For thecomputer to write information to the platter, the read/write head aligns the magnetic polarities,writing 0's and 1's that can be read later.
Once they have been determined, the disk controller instructs the actuator to move the read/write arm andalign theread/write head.
The holographic process uses lasers in replacement of the read/write head of a Hard Disk Drive and the media itself requires no momentum(unlike the platters in Hard Disk Drives).
These particulates can be magnetically aligned such that they represent binary digits,by inducing an electromagnetic field upon them via a devices read/write head.
The energized write head puts data on the diskette by magnetizing minute, iron, bar-magnet particles embedded in the diskette surface, very similar to the technology used in the mag stripe on the back of a credit card.
As can be seen in the above picture of the desktop hard drive the main six components that help make up the inside are the head actuator, read/write actuator arm,read/write head, spindle, and platter.
The increased reduction of the amount of particles required to record datais highly limited by the precision of the read/write head(the miniature device that reads and records data onto the recording medium) because the magnetic field which is used by the drive's read/write head to read and/or record(write) data is such that it already tentatively borders nearby data.
In the enclosure there is breath filters that make hard drives are not airtight, it aims to get rid of the heat that is in the hard drive because the process of spindle rotation andreading the Read- write head.
Interleaving is a method of organizing the sectors on a computer hard disk drive,allowing data to be arranged so the read/write head can access information easier, making data read off the hard disk drive faster.
To access a particular portion of the data contained on the magnetic ribbon, the device must wind the tape such that the beginning of the section containing the data is underneath thedevice that reads the data(the magnetic read/write head).
The new data blocks are necessarily scattered,slowing access due to seek time and rotational latency of the read/write head, and incurring additional overhead to manage additional locations.
Limiting the disk read and write instructions to sequences of 4K pages means that several smaller reads or writes are effectively cached into one larger operation,reducing the number of times the hard disk read/write head moves.
When a new file is written, or when an existing file is extended, the new data blocks are necessarily scattered,slowing access due to seek time and rotational delay of the read/write head, and incurring additional overhead to manage additional locations.
Hard Disk Drives will always be subject to inertia and centrifugal force induced by the moving parts of the drives mechanical components(platter,read/write head), Holographic Storage has no such issues;
While writing, head makes magnetic pattern on platter.