Examples of using Clock input in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
SCK Serial clock input terminal.
Low power Real-Time Clock(RTC)with independent power and 32 kHz clock input.
D6: the serial clock input(SCL).
The latches are transparent;they pass their inputs to the outputs on the falling edge of the latch clock input.
Main features Local clock input selectable.
Each clock input is terminated with an on-chip, laser-trimmed, 50Ω precision NiCr resistor to the clock-termination return.
CLK Input Serial Clock input pin.
TP serial clock input/TP Left signal in X Axis.
Support external 1PPS and 10Mhz clock input and SFN.
This is a shift clock input pin for serial data transmission.
To synchronise several HackRF One boards,the system offers connectors for clock input and output.
CLK Input The shift clock input pin for serial data transfer.
Other devices, such as Ethernet PHYs and switches,require a specific frequency clock input in order to function.
CLK Input The shift clock input pin for serial data transfer.
Clock inputs CLK+ and CLK- may also be driven with positive referenced ECL(PECL) logic levels if the clock inputs are AC coupled.
Mode of phase input and clock input is selectable by setting pin.
Setting a port intensity level of 15/33,the output of the P2 individual port-intensity controller serves as the clock input for the master intensity controller.
SCL Input This is a shift clock input pin for serial data transmission.
The MAX104 was designed for single-ended operation,maintaining superior dynamic performance when using low-phase-noise sine-wave clock input signals with as little as 100mV amplitude.
FIFO circuit in the clock input stage is for loading externally input video.
SPI1CLK_GP213 is the master configuration serial clock signal of TMS320C6748 chip to drive SPI clock input of an AD converter, Texas Instruments ADS1259.
When you first enable Clock Input for a device, Resolume will wait for the Clock Start signal.
In almost all applications, you want the sample clock input to be a single frequency.
Double input allows higher pixel clock input frequency by registering two pixels of typical image-sensor video data before serializing.
CLK/SCL Input This is a shift clock input pin for serial data transmission.
It provides one global clock input, eight global clock outputs and one global reset input, eight global reset outputs.
The truth table shows that when the enable/clock input is 0, the D input has no effect on the output.
In the absence of a data/clock input into the CDR, the CDR is required for a specified time to provide a reference signal for any downstream communications requirements i.e., the deserializer.
When a reference clock(e.g., 60Hz power line or GPS 1PPS)is present at the CLKIN pin and the enable external clock input bit(ECLK) is set to 1, the DS1341/DS1342 RTCs are frequency-locked to the external clock and the clock accuracy is determined by the external source.
