Examples of using Digital-to-analog in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
ANALOG-to-DIGITAL and DIGITAL-to-ANALOG CONVERSION 6.
The digital-to-analog converter input/output signal processing, Data communication and processing, and etc.
Recalling accident treatment, The digital-to-analog converter input/ output signal processing.
Output digital-to-analog converters(DACs) is designed to operate from a single 3 V to 5 V supply or a dual±5 V supply.
In such devices,a video filter amplifier follows the video digital-to-analog converter(DAC) that generates the video signal.
High-density digital-to-analog converters(DACs) with 10-bit to 12-bit resolution are use to control the gain of the VGAs.
One good solution is the purpose-built 103990060 ADC and digital-to-analog converter(DAC) board from Seeed Technology(Figure 5).
Two digital-to-analog(DAC) outputs with temperature-indexed lookup tables(LUTs) are available for additional control functionality.
DAC This project contains functions to configure the digital-to-analog converters(DACs) and to generate a continuous sine-wave output from each DAC.
Two digital-to-analog(DAC) outputs with temperature-indexed lookup tables(LUTs) are available for additional monitoring and control functionality.
The transmit pathis composed of a digital IIR filter, digital-to-analog converter(DAC), followed by a lowpass filter, and a preline driver.
On-board digital-to-analog converters(DACs) and microcontroller feedback to other nearby equipment permits a rapid feedback loop.
The DAC756x, DAC816x, and DAC856x devices are low-power, voltage-output, dual-channel, 16-, 14-,and 12-bit digital-to-analog converters(DACs).
Of course, you can buy a digital-to-analog coder and distill the"digit" into analog sound.
The device incorporates all the necessary elements for conditioning of sensor signals, analog-to-digital conversion,digital servo algorithm implementation using a 16-bit RISC microcontroller, and digital-to-analog conversion, as well as including dual servo amplifiers.
Recalling accident treatment, The digital-to-analog converter input/output signal processing, Data communication and processing, and etc.
Digital-to-analog converters(DACs) are used to translate the digital waveform to an analog signal, which is then amplified by a linear high-voltage amplifier to drive the transducer elements.
Traditional transmit implementations require relatively low-speed digital-to-analog converters(DACs) to generate the baseband waveform, as the bandwidth of this signal is relatively small.
Digital-to-analog converters(DACs) and digital potentiometers are used in these power supplies when on-the-fly programmability is needed but VID control is not built into the regulator controller.
The output is provided by the AD5422 precision, low-cost, fully integrated,16-bit digital-to-analog converter, which offers a programmable current source and programmable voltage output.
The output digital-to-analog converter(DAC) generates a sine wave and provides a clean signal with phase- continuous switching between 1200Hz and 2200Hz.
I/A Series system, FBM(input/ output modules) Sequence control, ladder logic control,Recalling accident treatment, The digital-to-analog converter input/output signal processing, Data munication and processing, and etc.
In these devices, the video digital-to-analog converter(DAC) generates the composite video signal, which must be lowpass filtered and amplified before reaching the output connector.
ST's high voltage BST capacitance controller series(STHVDAC)is a high voltage digital-to-analog converter(DAC) specifically designed to control and meet the wide tuning bias voltage requirement of BST tunable capacitors.
The stereo digital-to-analog converter(DAC) path includes filtering and mixing, programmable-gain amplifiers(PGA), soft muting, and optional voiceband digital filtering.
Each gamma reference voltage has an 8-bit digital-to-analog converter(DAC) with an isolation buffer associated with it to ensure stable operation.
A buffered MAX5134 four-channel, 16-bit digital-to-analog converter(DAC) generates the low voltage signals that drive the inputs of four MAX15500 signal conditioners output drivers.
The heart of Nativ Wave is its state-of-the-art digital-to-analog conversion, which is based on a fully balanced differential dual-mono design featuring two 24-bit/192kHz Burr-Brown DSD1792A DACs.
Direct-conversion architecture. Until recently, digital-to-analog converter(DAC) and the direct-conversion modulator performance was not adequate to support the demanding requirements of 3G multi-carrier, cellular base stations.