Examples of using Ethernet interfaces in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
For equipment with serial or Industrial Ethernet interfaces.
Ethernet interfaces include GE fiber uplinks options and multiple PoE/PoE+ ports.
Connect to devices through one or more Ethernet interfaces on the PC.
Two integrated Ethernet interfaces save costs, as there is no need to connect an ETH expansion module.
A third selection criterion to consider is the number of Ethernet interfaces required in the system.
The Ethernet interfaces are available in copper and fiber, with speeds ranging from 10 Mbps to 10 Gbps.
You must connect the modules externally with the Gigabit Ethernet interfaces and a crossover cable.
For example, if two Ethernet interfaces are being channel bonded, both eth0 and eth1 may look like the following example.
This is usually not an issue because most PHYs drive their Ethernet interfaces between V+ and ground.
For example, if two Ethernet interfaces are being channel bonded, both eth0 and eth1 may look like the following example.
The Catalyst 2950/2955 seriesswitch can support up to eight compatibly configured Ethernet interfaces in an EtherChannel.
Ethernet interfaces on the switch operate at 10, 100, or 1000 Mbps, or 10,000 Mbps and in either full- or half-duplex mode.
Intrachassis stacks allow all the Fast Ethernet and Gigabit Ethernet interfaces to participate in the same Layer 2(L2) domain.
The feature makes the EtherSwitch module functionally equivalent to the NM-4E,except that the EtherSwitch module has Fast Ethernet interfaces.
Unfortunately, many current Ethernet interfaces have a small limit on the number of addresses that the hardware can be configured to recognize.
To build and deploy a dedicated memcached server, use a relatively low-power CPU, lots of RAM,and one or more Gigabit Ethernet interfaces.
The EC360 Gateway has two separate Ethernet interfaces(WAN and LAN) which makes possible to provide secure communication to the field installation.
Cisco IOS Software Releases 12.2(15)ZJ and 12.3(4)T can directly associate an IP address with Fast Ethernet orGigabit Ethernet interfaces on the EtherSwitch module.
Connection of the two Gigabit Ethernet interfaces and use of the stacking-partner command eliminates conflicts in the VLAN databases between the two modules.
Xfinder is a tool for indexing and logging IP addresses from MAC(Media Access Control)addresses of Ethernet interfaces mounted on CPU boards such as Raspberry Pi and BeagleBone.
The board also features Gigabit Ethernet interfaces for host connection and for exchanging data between the real-time model and Ethernet-based devices.
These systems are controlled by either digital I/O, analog control or IPG's own LaserNet software with the additional option to add either DeviceNet,Profibus or Ethernet interfaces.
These Fast Ethernet interfaces can be used for physical LAN segregation, creation of a demilitarized zone(DMZ), or as a WAN interface. .
Our products provide benefits such as compact, space saving modular format, fast settling times to help minimize patient radiation exposure, dual speed starter,boost/brake capabilities and RS-232 or optional Ethernet interfaces.
Benefits of NTP time server appliance Secure stratum 1 NTP time server Tracks 12 satellites for increased precision Support for NTP v2, NTP v3, NTP v4 andSNTP compatible clients Supports both TCP/IP networks Six RJ-45 ethernet interfaces 10/100/1000 Mbit, so can provide time for six independent networks Configured across networks via pre-installed software, TimeSync Can handle up to 3,000 NTP requests per minute, per port.
The Cisco Catalyst Blade Switch 3020 for HP c-Class BladeSystem: Dramatically reduces cable complexity Reduces space requirements by optimizing rack space use Improves management at the server edge by using the Cisco management framework Secures business assets with Cisco IOS Software security features Enhances operational efficiency with consistent services deployment Configurations WS-CBS3020-HPQ Sixteen internal 1000BASE ports connected to servers through the c-Class BladeSystem backplane Up to eight external Gigabit Ethernet uplink ports:Four external dual-media Ethernet interfaces.
Ethernet interface: 10/100BASE-T with automatic MDI/MDIX cross-over.
Mbit ethernet interface.
The Ethernet interface supports jumbo frames(2036 Bytes);
Ethernet interface: software upgrade, PC online printing and remote control.