Examples of using Master controller in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
The master controller for Visors.
Smart Grid and microgrid master controllers.
I/O master controller RC-207 was released.
Show the messages sent from the master controller.
CANopen Master Controller.
HX-SZ300, adopts the advanced micro control unit, as a DMX512 master controller, It can send.
Released Master Controller designed for PC games.
Operate the camera with the master controller AC-4813.
DMX512 master controller is to control power on/off to cater for unwanted dimming lighitng system.
Send the joint space path(usually generated by a kinematic simulator) to the master controller, and run the trajectory control.
The master controller is a CPU board mounted with an RX-series processor manufactured by Renesas Electronics.
DMX address can be manually assigned and shown on the digital numeric display orautomatically assigned by master controller.
The master controller is normally used only when adding new access points to the Cisco Wireless LAN solution.
When no more access points are being added to the network,Cisco WLAN solution recommends that you disable the master controller.
The master controller is normally used only when adding new access points to the Cisco Wireless LAN solution.
When no more access points are being added to the network,Cisco WLAN solution recommends that you disable the master controller.
All of the data is integrated into a master controller that interprets the commands and feedback to keep everything in synch.
When no more access points are being added to the network,Cisco WLAN solution recommends that you disable the master controller.
As the master controller also has two Ethernet ports, you can implement Ethernet/EtherCAT communication by yourself.
The 1-Wire bus is a simple signaling scheme thatperforms half-duplex bidirectional communications between a host/master controller and one or more slaves sharing a common data line Figure 2.
The interface for connection to the master controller in the vehicle must be flexible enough to facilitate adaptation to different conditions.
Overview The Maxim 1-Wire bus is a simple signaling scheme thatperforms half-duplex bidirectional communications between a host/master controller and one or more slaves sharing a common data line Figure 1.
The master controller is normally used only when adding new access points to the Cisco Wireless LAN solution.
HX-SZ300, adopts the advanced micro control unit,as a simple version DMX512 master controller, It put out the DMX-512 standard digital control signal which is internationally widely used.
The master controller has multiple running models to meet different requirements and interfaces for connecting with auto charging system loop inductor and signal lamp.
SKAI2 system- potential scope of delivery Optional ControlSoftware SKAIwareTM The interface between control unit and master controller in the vehicle comes as either a CAN bus interface or, alternatively, as a switching signal interface.
The source code of the master controller implements not only the servo control of the angles, angular velocities, torques, and currents of all joints, but also the functions of the gravity compensation, external force following with torque sensors, and path control.
Also show the time stamp of the master controller, the set values of the control parameters, and the number of processing points for path control.
HX-SZ300 DMX512 Master Controller HX-SZ300, adopts the advanced micro control unit,as a DMX512 master controller, It can send the DMX-512 standard digital control signal which is internationally widely used. Connection with DMX decoder.
When“FUN”=”ON”(down as 1), this product is for master controller, which send the operating mode DMX signal to next decoder, so as to achieve multiple decoders synchronized controlled.