Examples of using Switch input in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
Magnet Reed Switch Input.
Switch input terminals: 8 pairs.
Ignition key switch input.
The switch input can be used to control other electronic components.
Normally Open Switch Input:.
It also has the function of communication interface, electrical pulse output,four-way switch input.
Normally Open Switch Inputs.
Normally open switch inputs[DI] and 12 normally open transistor switch outputs[DO].
You can quickly switch inputs with the buttons in the bottom right.
Digital scaling method by key switch input.
The MAX16806 also has a switch input(SW) to override the analog dim setting.
Can light up at arbitrary digit by key switch input.
Definable normally open switch inputs[DI] and 4 definable normally open relay switch. .
DI: 9 Definable normally open switch inputs.
Definable normally open switch inputs[DI] and 4 definable normally open relay switch outputs[DO].
Equipped with 16bit LED outputs and 8bit Switch inputs.
Definable normally open switch inputs[DI] and 18 definable normally open transistor switch outputs[DO].
For those of you who are used to hardware design,you will notice that there is no pull-up resistor on switch input.
Normally open switch input: 4DO.
When either switch input or a remote control signal header is detected, this IC outputs a signal for notification to the CPU or other devices.
Right-click the input method indicator to switch input modes, open the IME pad, or open more IME settings.
In this case, the second input will be indexed as 0, the third as 1, the fourth as 2,and so on(the Switch input chop is not indexed).
Definable normally open switch inputs[DI] and 12/18 definable normally open transistor switch outputs[DO].
For people who find it difficult to perform touch operations using their fingertips,it is possible to perform operations using switch input linked to the keyboard.
For example, V+ 5V and a fault voltage on the switch input is 8V, then V+ is pulled to approximately 7.7V-too high for most digital parts connected to V.
Just in the clock operation in which users do not use the communicational function,this IC operates with a power supply of 1.1 V. A 8-channel switch input detection circuit is also included.
The switch input not only monitors the state of the switch but also has a debounce feature and supplies the switch with a wetting current.
With these functions,it is easy to verify the signal processing logic, switch inputs and compare the outputs of multiple logic circuits, and more.
Add page switching input to User List panel.(Mail Box).