Examples of using The flask in English and their translations into Japanese
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Programming
I am handed the flask.
The Flask Project Walkthrough.
I say the flask is half-full.
Easy clean and easy refill the flask.
People also translate
The flask can be arranged as follows:.
Size fits most of the flask and wine bottles.
Is it necessary to measure vapor temperature inside the flask?
Recently he developed the Flask micro-framework.
Incubate the flask at 37°C for 2 min or longer as necessary.
Just a day,” he sat down to the flask in his fist.
Azeotropic hydrogen chloride(100.2 g) and water(36.26 g)have been added to the flask.
Wax surface area 20 mm:limited to less than 25% of the flask cross-sectional area.
Until you publish the Flask(Python framework) test page on the web.
Upon opening the packaging I was surprised at how large the flask for the Dodil is.
For the best performance, the flask should be pre-heated with hot water.
After finishing the test, the heater moves down to accelerate the cooling of the flask.
That's it, until we released the Flask application on Sakura VPS.
Attach the flask to the concentrator tube with springs, clamps, or equivalent.
Sakura stares at the flask from all the direction until she gets the answer.
For this,the pipette is lowered into the coolant and the substance is taken into the flask.
Put warm water(approx. 40 degrees) into the flask or mug, then add a suitable amount of chemical agent.
For an ultrasonic extraction setup, e.g. Soxhlet or Clevenger,the ultrasonic processor can be attached to the side neck of the flask.
Pour into the flask the mixture is compacted by shaking, pressing or hardens in an oven.
After filling 100 mL of a sample into the distillation flask, the flask is sealed with a mobile multi-plug.
Additional necks of the flask could be used for a mechanical stirrer or thermometer or be used for a funnel to to let reactants drip in.
For a maximum level of safety,the automatic shield lift surrounds the flask, reducing the risk of touching any hot parts while a measurement is running.
If you want to develop and contribute to the Flask project, clone the repository and install the code in development mode.