Examples of using The sensor in English and their translations into Kazakh
{-}
If the sensor is good, fu.
So at some level, the sensor is working.
Who wants to buy me the sensor and I can give it a go!?
DB9F is usually used for the connector at the sensor side.
People also translate
At high temperatures, the resistance of the sensor is very.
The sensor is of high quality, and it allows you to capture great photos.
You need to do a double tap on this"point" and the sensor will stop working.
The sensor unit: 82 x 61 x 37 mm. weight: approximately 180 g(without battery).
During the burn in time, the sensor need to be placed in a clean air environment.
After checking, you will be absolutely clear whether it is necessary to replace the sensor.
During the burn in time, the sensor need to be placed in a clean air environment.
There is a specified location of items by default- if it has changed, the sensor is triggered.
In addition, the sensor size will also be larger, capturing more light.
Patented design simple mounting flanges, Install the sensor does not need another dozen screw holes.
As a result, the sensor on the phone is buggy, or it completely breaks down.
Smoke density system: a separate signal processing system is provided to ensure that the sensor is linear;
When the distance between the sensor unit and the car between 0.4 m and about 5 m.
The sensor adjusts to the person's height and measures the temperature at a distance of 25 cm.
Recognition accuracy is less than 1mm, The sensor can identify the level fluctuation of less than 1mm.
The sensor itself has only 3 contacts, so there should be no difficulties with its electrical connection.
V wide input voltage range, make sure that the sensor is not under the influence of the input voltage.
This marking is significantly different from different manufacturers, butin most cases it represents the sensor.
This type of removal of the sensor phone lock is most reliable, as it eliminates the accidental press.
If the sensor is for some reasons to come into a malfunction, problems will begin with its correct operation.
In fact, this is a conventional ultrasound scan,only the sensor is used to diagnose cardiac structures.
The sensor tells the control board when there is enough water in the tub and to stop filling with water.
When complementing the security complex, the sensor is mounted at the most important entrances to the building or in the corridors.