Examples of using Data bits in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The supported data bits are as below.
Most serial ports use between five and eight data bits.
Some unwanted data bits might enter into the RAR files.
However, this change is irreversible,and so the data bits are not erasable.
At least seven data bits are required to transmit ASCII characters.
People also translate
If you are transferring standard ASCII(0 to 127) seven data bits are enough.
New Webinar Series: Data Bits& Bites for Busy People.
Presentation file getting corrupt due to CRC error i.e. change of data bits of the file.
Due to CRC error, unwanted data bits can be induced to the RAR files altering RAR file structure.
By 2048, physical and cognitive structures will also melt into air, or into a cloud of data bits.
Then the next data bits, up to a total of nine, are succeeding, ending with the most significant bit. .
It is built by read-only algorithms and thus conversion process does not alter any data bits of the OST file.
CRC Error: Due to CRC error,unwanted data bits can be induced to the RAR files causing corruption to them.
Serial communication parameters Baud rate adjustable(default 115200bps),Parity: None Data bits: 8, stop bits: 1.
CRC Error: Unwanted data bits get inserted into WinRAR file when CRC error occurs and the RAR file goes corrupt.
This user-friendly interfaced RAR repair tool includes read-only strategies to securely fix RAR file without altering its data bits.
Each channel is 16 data bits wide, has its own control/address pins, and allows access to 8 banks of DRAM.
However, the UART on all National Instruments serial products only supports 5 to 8 data bits, Even/Odd/Mark/Space/None parity and 1/1.5/2 stop bits.
Change in data bits of Word file while transferring it over internet may lead to CRC error causing Word file corruption.
Each constituent code(check node) encodes 16 data bits except for the first parity bit which encodes 8 data bits.
In one implementation of OFDM modulation, the data in each channel data stream is grouped to blocks,with each block having a particular number of data bits.
The MM protocol uses 1 start bit, 8 data bits, odd parity and one stop bit at the speed of 1200 bits/sec.
The highest data rate type of interface orgreatest possible Interface Type is selected prior to sending the Forward Link Skew Calibration Packet so that all existing data bits are calibrated.
The first 4680 data bits are repeated 13 times(used in 13 parity codes), while the remaining data bits are used in 3 parity codes(irregular LDPC code).
Transfer Error: During RAR file transfer over network, internet threats can damage its data bits or may even damage the RAR file header giving rise to CRC error and corrupting RAR file.
Moreover, eight data bits are always used regardless of the number of data bits specified for transmission, with the unused bits assigned a value of 0.
The highest data rate type of interface or greatest possible Interface Type is selected prior to sending the Forward Link Skew Calibration Packet so that all existing data bits are calibrated.
For example, if some information about thetransmission paths is known(i.e., full CSI or partial CSI is known), demultiplexer 420 may direct more data bits to the sub-channels capable of transmitting more bps/Hz.
The highest data rate type of interface or greatest possible Interface Type is selected prior to sending the Forward Link Skew Calibration Packet so that all existing data bits are calibrated.
For example, if some information about the transmission paths is known(i.e., full CSI orpartial CSI is known), demultiplexer 420 may direct more data bits to the sub-channels capable of transmitting more bps/Hz.