Examples of using Fixed disk in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Fixed disk drive.
This function is supported on fixed disks only.
Fixed disk drive.
Comments: This function is defined for PC/XT fixed disk drives only.
Choose the Fixed Disk number that is the same as the drive missing the data 4.
Comments: This function is used to get the manufacturing header of the fixed disk.
Choose the Fixed Disk number that is the same as the drive missing the data 4.
Can I boot from this Kingston flash card, set it as a fixed disk or run an OS from it?
In this state, the power supply ceases providing regulated power to the computer system, but the state of the computer system has not been saved to the fixed disk.
We do not support ourflash cards as bootable devices, fixed disks or something you can run an OSfrom.
Comments: This function causes the fixed disk adapter to carry out a built-in diagnostic self-test, indicating whether the test was passed by the returned status.
In doing so, the video controller begins generating the video signal again and the fixed disk begins spinning again.
This function causes the fixed disk adapter to recalibrate itself for the specified drive, positioning the read/write arm to cylinder 0, and returns the drive's status.
Comments: This function transfers the contents of the internal sector buffer of the fixed disk adapter to the system memory.
This function resets the fixed disk controller, recalibrates attached drives, moves the read/write arm to cylinder 0, and prepares for subsequent disk I/O.
Comments: This function returns a code indicating the type of floppy or fixed disk referenced by the specified drive code.
First, in the normal operating state 150, the fixed disk within the fixed disk storage device 31 is constantly spinning at typically 3600 revolutions per minute(RPM).
Comments: This function initialize disk sector and track address fields on a drive attached to the ESDI Fixed Disk Drive Adapter.
Comments: This function tests whether the specified fixed disk drive is operational and returns the drive's status.
The power management driver ascertains the state of the computer system 10 andwrites the entire state of the computer system to the fixed disk storagedevice 31.
Comments: This function causes the fixed disk adapter to carry out a built-in diagnostic test on its internal sector buffer, indicating whether the test was passed by the returned status.
The power management driver ascertains the state of the computer system 10 andwrites the entire state of the computer system to the fixed disk storagedevice 31.
A fixed disk 626 is also coupled bi-directionally to processor 622; it provides additional data storage capacity and may also include any of the computer-readable media described below.
If the Suspend Flag is SET in NVRAM 96, then the computer system 10 is in the suspend state 154 andthe state of the computer system 10 was stored in the fixed disk storage device 31.
The entire stateof the computer is safely saved to the fixed disk storage device, system power is now"off," and computer is now only receiving a small trickle of regulated power from the power supply to power the switch circuitry.
If the Suspend Flag is SET in NVRAM 96, then the computer system 10 is in thesuspend state 154 and the state of the computer system 10 was stored in the fixed disk storage device 31.
The entire stateof the computer is safely saved to the fixed disk storage device, system power is now"off," and computer is now only receiving a small trickle of regulated power from the power supply to power the switch circuitry.
On theother hand, if the Suspend Flag is CLEAR in NVRAM 96, then the computer system 10 is in the off state 156 andthe state of the computer system 10 was not stored in the fixed disk storage device 31.
Function causes the fixed disk adapter to recalibrate itself for the specified drive function causes the fixed disk adapter to recalibrate itself for specified drive positioning the read/write arm to cylinder 0 returns the drive's status INT 13H(0x13) Function 11H(0x11 or 17) Recalibrate drive 12H(0x12 or 18) Controller RAM diagnostic.
On theother hand, if the Suspend Flag is CLEAR in NVRAM 96, then the computer system 10 is in theoff state 156 and the state of the computer system 10 was not stored in the fixed disk storage device 31.