Examples of using Forward link in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Forward Link Only.
MediaFLO- Media Forward Link Only.
Inter-user and intra-user QoS support is also provided on the forward link.
Inactive forward link QoS flows are prioritized in order of their phase parameter.
The remaining channels may be allocated to separate users as in the forward link.
The SINR of the forward link signals can be obtained by measuring the respective pilot signals.
The highest data rate type of interface or greatest possible Interface Type is selected prior to sending the Forward Link Skew Calibration Packet so that all existing data bits are calibrated.
On the forward link of the CDMA system, the transmit power is also adjusted to increase system capacity.
Generally, this packet is only sent when the forward link data rate is configured to a rate of around 50 Mbps or lower.
Forward link and reverse link channels are defined upon the radio air interface.
If the value in Bit 7 is equal to'0' the Type handoff request is for the forward link, if it is equal to'1', then the Type handoff request is for the reverse link. .
On the forward link, a network entity can schedule each service based upon its QoS information and buffer status, thereby to provide inter-user or intra-user QoS support.
The highest data rate type of interface or greatest possible Interface Type is selected prior to sending the Forward Link Skew Calibration Packet so that all existing data bits are calibrated.
That is, inactive forward link flows that become active in the next MAC frame receive the highest priority.
The highest data rate type of interface orgreatest possible Interface Type is selected prior to sending the Forward Link Skew Calibration Packet so that all existing data bits are calibrated.
Additional gains in the forward link capacity can be achieved by using directional antennas and/or adaptive spatial filters.
This is currently indicated by selecting Bit 0, Bit 1, or Bit 2 to select either a Type 2, Type 3 orType 4 mode on the forward link, respectively;
Since MDDI_Stb is cycled at a rate that is one half of the forward link rate, the corrected round-trip delay measurement needs to be divided by 2 and then rounded up to the next integer.
A forward link packet is sent and the MDDI link operation(transfer direction) is changed or turned around in the middle of this packet so that packets can be sent in the reverse direction.
This configuration canprovide a high carrier-to-interference ratio(C/I), which results in a large capacity(e.g., a hundred or more voice users may be serviced by 1.25 MHz on the forward link).
For example, if the forward link rate is 200 Mbps and the Reverse Rate Divisor is 4 then the reverse link data rate is expressed as.
In some aspects,for example, each transmission 118 may comprise a one-to-many transmission in a Forward Link Only(FLO™) system, such as the MediaFLO™ system available from Qualcomm, Incorporated of San Diego, Calif.
If the host has no reason tosuspect a link failure, and a correct response to a Reverse Link Encapsulation Packet and zero forward link CRC errors is being reported by the client, a host may assume that everything is operating or functioning accordingly or appropriately(no link failure for example) and proceed with the power down/hibernation process.
As stated earlier, at the time of"start-up," the host configures the forward link to operate at or below a minimum required, or desired, data rate of 1 Mbps, and configures the sub-frame length and media-frame rate appropriately for a given application.
As stated earlier, at the time of"start-up," the host configures the forward link to operate at or below a minimum required, or desired, data rate of 1 Mbps, and configures the sub-frame length and media-frame rate appropriately for a given application.
Please help us to grow. Forward our link to a friend! https://www.4yacht. com.