Examples of using Hydrostatic test in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Hydrostatic Test.
ISO 1167 Pipe Hydrostatic Test.
Hydrostatic test.
Ultrosonic test; Hydrostatic test.
Hydrostatic test pressure.
Eddy Current Test, Hydrostatic Test, UT, PT.
Hydrostatic Test Pressure.
Hydrostatic test pressure or NDE.
Each length of pipe shall be subjected to the hydrostatic test.
Hydrostatic test: temperature test:.
Eddy Current, Air Under Water Test, Hydrostatic Test.
Hydrostatic test, spectral analysis, intergranular corrosion, water pressure test, .
Ultransonic Test, Eddy Current Test, Hydrostatic Test.
Hydrostatic test for each coil and conform to ASTM standards and requested specifications.
Ultransonic Test, Eddy Current Test, Hydrostatic Test.
Hydrostatic Test After U Bending: Maximum Test Pressure 600 Bar, Soaking 10 Sec. With.
T est: 100% Eddy Test or Hydrostatic Test, UT Test. .
Each pipe shall be subjected to the nondestructive electric test or the hydrostatic test.
When specified by the purchaser, pipe shall be furnished with both the hydrostatic test and a nondestructive examination having been performed.
ASTM B163/ B167 INCONEL600 SEAMLESS TUBING, ANNEALED,100% EDDY CURRENT TEST AND HYDROSTATIC TEST.
Each length of pipe furnishedwithout the completed manufacturer's hydrostatic test shall include with the mandatory markings the letters“NH.”.
Hydrostatic test can not be found through-wall defects but very close or very close to the wall thickness in depth but not yet fully penetrated defects.
When specified by the purchaser, pipe shall be furnished without hydrostatic test and without nondestructive examination.
Tensile tests, impact tests, hydrostatic tests, and nondestructive electric tests shall be made in accordance to specified requirements.
Additionally, we could provide quality control records and related reports to our customers if necessary, such as"physical and chemical property report of materials for pump's main parts","rotor balancing report","hydrostatic test report" and"pre-delivery inspection report".
Each seamless tube shall be subjected to the hydrostatic test, or, instead of this test, a nondestructive electric test may be used when specified by the client.
Each U-tube shall be subjected to a hydrostatic test, using a noncorrosive fluid, or when agreed upon between the purchaser and manufacturer, they may be tested at 11⁄2 times the specified design working pressure.
NDT Ultrasonic Test Hydrostatic.