Examples of using Input level in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
RF Input Level Range.
To control the input level.
Input Level: -15dBV.
Reference input/output 10MHz, BNC female Input level 0dBm to +10dBm.
Input Level 29~80dBuV.
RGB LED with different input level, you can display seven kinds of colors!
Input Level: -65 to -25.
The contribution of the center and LFE channels may be controlled with the Input Levels control group.
Input level: -65 to -25dBm.
You can set the input parameters like distortion and adjust input levels as per your requirement.
Input level: 10dBmV-20dBmv.
After all, for only the S-meter, I needed three level controllers such as Zero adjust, Amplification gain, and Input level.
Signal Input level -78dBm--20dBm.
The input levels from the microphones 801 and 802 may also be independently adjusted according to a desired ICA/BSS learning rate or to allow more effective application of post processing methods.
Automatic volume control deals with the wide range of input levels occurring in everyday life, including soft speech and loud speech.
RF Input Level Range(10 dB headroom).
Maximum safe input level Average continuous power +27dBm.
RF Input Level Range: -120 dBm to +30 dBm.
Max. input level Continue 1min -10 dBm.
AUX input level control and recording playback RCA Jack.
Digital input level TTL with jumper configurable pull-up or pull-down circuitry.
The high and low input levels are stored in nonvolatile memory and correspond to the high and low output levels. .
For example, at high input levels, the ICA filter values may rapidly change, and more quickly saturate or become unstable.
For example, at high input levels, the ICA filter values may rapidly change, and more quickly saturate or become unstable.
The red input level from the IBM PC is input to a buffer 474, the output of which is input to another buffer 476.
Drag the Input Level slider to set the input volume for your guitar, watching the level meter(the thin horizontal bar above the slider) to make sure the volume is not high enough to cause clipping(distortion).
RF Level Input -105dBm~-20dBm.
Input Signal Level -65 to -25dBm.
Input Signal Level -87 to -20 dBm.