Examples of using Motion vector in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
If no motion vectors are present, the method ends.
Otherwise, at 1320,a best candidate motion vector is selected.
Otherwise, the method for removing a motion vector returns to 1310.
Removing the motion vector corresponding to arrow 808 causes the largest increase in image distortion.
At 1330, the best candidate is tentatively removed from the collection of motion vectors.
Otherwise, the motion vector having the smallest ΔD/ ΔR is selected as the best candidate for removal.
At 1530, the decoder receives the sample pattern information,reference images, and motion vector values.
Arrows 810 and 812 correspond to motion vectors that decreases the distortion if added to the collection.
Likewise, conventional video coding standards prescribe that an inter-encoded macroblock is typically assigned a single motion vector.
However, as it requires Motion Vector support it is more expensive and not supported on some platforms.
At 1420, the encoder generates an irregular sampling, or distribution, of motion vectors associated with the target image.
The output collection of motion vectors 150 can then be encoded as part of a video compression and transmission process.
This situation can occur when using a more sophisticated rate-estimation method or when allowing several simultaneous changes to the motion vector selection.
At 1210, a best candidate motion vector is selected as a potential addition to the collection of motion vectors. .
A digital video camera 1610 captures images in an electronic form, and processes the images using compression device 1620, which uses the motion vector selection method during the compression and encoding process.
Further, the motion vector MV4 of the block BL4 is the motion vector that is used in predictive coding of the block BL4.
For example, when the block a0 is encoded andthe use of prediction of intra-coding, the motion vector mv_a0 block a0 is not valid, and thus, mv_a'=mv_a1, and if the motion vector of the block a1 is not valid, mv_a'=mv_a2.
First, motion vectors are allowed to be applied more than once, thereby altering the compensated value which is an average of mapped values.
The reference area in the picture may be specified by using thelike reference picture index(refIdx) and which will be described later, a motion vector( motion vector) indicating the reference picture.
Correcting the extracted motion vector using the estimated posture, if motion of the input device is sensed; and.
For example, if an inter-coded macroblock received in the bitstream has a CBP value of“0,” the decodermay receive no residual data for the macroblock and may simply produce a predictive block identified by a motion vector as the decoded macroblock, or a group of predictive blocks identified by motion vectors with respect to partitions of the macroblock.
This adaptive filtering process uses the motion vectors, irregular sampling pattern, and reference images to generate a prediction of the target image.
Candidate motion vector determination device 135 determines if one or more motion vectors should be added to, or removed from, output collection of motion vectors 150.
If at 630 the rate R is not less thanthe target rate RT, or at 640 exceeds the target rate RT by an amount Rs, then at 650 one or more motion vectors are removed until the different between RT and Rs is greater than or equal to the rate estimate R. At 650, in some embodiments, motion vector are removed until a time limit has expired.
The motion vector MV4 of the block BL4 is obtained by motion detection of the block BL4 with reference to the forward picture P1, and it shows a region R4f corresponding to the block BL4, of the forward picture P1.
Similarly, mv_b' indicates the first valid motion vector among mv_b0, mv_b1,…, mv_bN,and mv_c' indicates the first valid motion vector among mv_c, mv_d, and mv_e.
In this example, a motion vector that is currently in the collection may be removed, and a motion vector which is not currently in the collection may be added.
By comparing the current speed, the motion vector and fixed parameters such as the braking distance, the collision probability is calculated by the 3D sensor and transferred to the machine control system via CAN bus or Ethernet and then signalled to the driver.
It also is much more dynamic, so that you can see that the same form opens andcloses in a very dynamic way as you move across it, because it has this quality of vector in motion built into it.