Examples of using User terminal in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
Earth Orbit Local User Terminal.
The N. sub.u selected user terminals can have the same or different number of antennas.
Additionally, ASIC can reside in a user terminal.
In this case, the user terminal apparatus 200 may be configured to recognize finger printing of a user. .
Sent and received messages are encrypted in AES256 format and stored in the user terminal.
Each selected user terminal transmits user-specific data to and/or receives user-specific data from the access point.
A communication unit which communicates with a user terminal apparatus;
ISDN terminal: User terminal(including integrated cards) used on ISDN line terminals connected to ISDN lines.
In order to take advantage of the multiple paths, the spatial channel between antenna elements and user terminals needs to be characterized.
Step 501: When a WLAN user terminal requests to detach from the WLAN, the WLAN user terminal sends a detach request to the network.
For example, an access point(or designated UT) may manage admissions control and/or scheduling for a connection between two other user terminals.
The decoded data for each user terminal may be provided to a data sink 244 for storage and/or a controller 230 for further processing.
And as mentioned earlier, in the enterprise security realm, there is not only security for user terminals, but also server and network infrastructure security.
Instead, each user terminal processes all transmitted packets, extracts the user identification in each packet, decodes packet directed toward the terminal, and ignores remaining packets.
At this time, the AAA server does not need to send the notification to the user terminal, but simply sets the flag of the service connection status as WLAN detached.
There are a number of possible intrusion points: antennas on satellites and ground stations,the landlines that connect ground stations to terrestrial networks, and the user terminals that connect to satellites.
Step 603: The current WLAN user terminal returns a response message to the AAA server, indicating the user has already detached from the WLAN and the WLAN based service for the user has been terminated.
A typical gateway uses a number of such transmit modules 334 to provide service to many user terminals 124, 126 at a time, and for several satellites and beams at a time.
Specifically, the display apparatus 100 and the user terminal apparatus 200 may be interlocked using various communication methods such as BT(BlueTooth), wifi, PAN, LAN, WAN, Wired I/O, NFC Interface, RFID Tag, IR Interface, USB(Universal Serial Bus).
A typical gateway uses a number of such transmit modules 334 to provide service to many user terminals 124, 126 at a time, and for several satellites and beams at a time.
Here are some possible intrusion points for a cyberattack: antennas on satellites and ground stations,the landlines that connect ground stations to terrestrial networks, and the user terminals that connect to satellites.
The WLAN access unit 202 is responsible for the accessing androuting management of the user terminal, enabling the user terminals therein to communicate with each other using IP protocol and to connect and communicate with other IP networks.
However, the sharing setting information is not necessarily stored in the server and instead,it may be received from outside, such as from the display apparatus 100, the user terminal apparatus 200, and the service providing server 10.
Step 803~804: On receiving the notification, the HSS/HLR sets the current service connection status of the relevant user terminal as WLAN detached, then returns a response message to the AAA server, indicating that the service connection status of the user has been correctly updated.
Further, it should be appreciated that modules and/or other appropriate means for performing the methods and techniques described herein can be downloaded and/or otherwise obtained by a user terminal and/or base station as applicable.
There are many reasons that the AAA server may initiate contacts with the user terminal: it may be that the user has not contacted with the WLAN for a long time, then relevant timer in AAA server is expired, which may result in the AAA server initiating the contact procedure with the user terminal.
The Chinese Internet has always been heavily censored but the new focus on Xi's demand to ensure“the voice of the party can reach all kinds of user terminals directly”, has prompted propaganda chiefs to hunt down new media specialists from all over the nation.
As part of the contract,Orolia will deliver a six-channel McMurdo Medium-altitude Earth Orbit Local User Terminal(MEOLUT) system and two LEO/MEOLUT single-channel systems which will function as LEOLUTs(Low-altitude Earth Orbit LUTs) when LEOSAR satellites are in view, and as MEOLUT channels for the rest of time.
Step 407~408: The AAA server sends a user data updating request to the HLR/HSS, andthe HLR/HSS updates user status information of the current WLAN user terminal; after the updating process, the HLR/HSS sends a data updating response message to the AAA server.
Step 903-904: On receiving the notification,the HSS/HLR records that the user data of the corresponding WLAN user terminal has been deleted from the AAA server, then returns a response message to the AAA server, indicating that the HSS/HLR has set a flag indicating the user data has been deleted.