Examples of using Write performance in English and their translations into Korean
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Programming
-
Computer
The read and write performance of different UHF RFID reader is different.
Supports up to four SATA drives for reliable read and write performance.
The device has excellent read and write performance with beautiful appearance and is easy to use.
It determines the starting position of a partition to ensure optimal read/write performance.
While read performance was similar, the 4k write performance dropped by about 26 percent.
This allows additional space to be reserved to assist in maintaining high write performance.
RAID 10 provide the highest read and write performance but require two times as many disks.
Water immersion test: 20℃, 24 hours, 2 meter deep(does not affect the read/write performance).
Up to 100% faster random write performance** with Enhanced Caching that accelerates OLTP, VDI, web server and database applications.
While 4K read performance was similar, the write performance dropped by 26 percent.
Chemical test: bleach/caustic soda 20℃/10 hours(does not affect the exterior and read/write performance).
For example, recording events to an SSD can ensure optimal read and write performance to speed up event alerts to reduce your response time.
Advanced Write Caching provides a 20% boost over previous generation drives in random write performance*.
Sequential read and write performance of the 512GB device are improved by approximately 70 percent and 80 percent, respectively, over previous generation devices.
This firmware update will restore your SSD's sequential write speed and improve the random read and write performance.
Given the over-provisioning evaluation result, you can determine your target write performance(IOPS) to acquire the recommended over-provisioning ratio.
With global tables, you can give massively scaled, global applications local access to Amazon DynamoDB tables for fast read and write performance.
The SSD Profiling Tool is a unique QTS app that allows you to test SSD random write performance with extra over-provisioning ratio from 0- 60%.
When SSD storage is almost full, write performance can drop dramatically as it lacks sufficient space to manage upcoming I/O and garbage collection.
During QNAP testing, iSER can increase an all-flash storage array's random read and write performance up to 60%, while latency is optimized by up to 50%.
The memory and hard disk read and write performance are relatively average, the memory latency is acceptable, but the SSD sequential read and write are more than 500MB/s.
These systems can improve read performance substantially, but they do not improve write performance, and they add operational complexity to system deployments.
Our TS-932X with WD Red hard drives and a WD Blue SSD provides large storage capacity in a compact size and features unique SSD technologies to improve read and write performance.
With most modern CD/ DVD/ BD devices enabling DMA highly increases read/ write performance. If you experience very low writing speeds this is probably the cause.
To increase random write performance and reliability, the ES1640dc features NVRAM modules(DRAM Write Cache with Copy-to-flash) to protect write data.
The TS-2477XU-RP supports RAID 50/60 to provide greater protection and random write performance, striking a balance between capacity, protection and performance. .
SSDs can deliver incredibly high read and write performance for both sequential and random data requests from the CPU through the use of multi-channel architecture and parallel access from the SSD's Controller to the NAND Flash chips.
When using a NAS with over 6 disk bays,RAID 50/60 not only provides greater data protection and random write performance than a single RAID 5/6, but also maximizes usable storage compared to RAID 10.
While almost all SSDs have shown consistent write performance degradation, QNAP's software-defined SSD extra over-provisioning helps sustain an optimized SSD performance. .
Although peer-to-peer replication enables scaling out of read operations, write performance for the topology is like that for a single node.