Examples of using Cathode in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Cathode Electrode where reduction occurs.
The electrode connected to the negative terminal is called the cathode.
Cathode The electrode at which reduction occurs.
The electrode which is connected to thenegative terminal of the battery is called the cathode.
The cathode is the electrode where reduction occurs.
High voltage electron beams from a cathode are focused by magnetic lenses on to the specimen.
The cathode is the electrode where reduction takes place.
Our team develops our sputtering targets and arc cathodes continually and improves their material and coating properties.
Connect the output line of the lead-acid 12V iCharging Protector with the eight output ports of the machine, connect the red clip of the output line to the anode of the battery,and connect the black clip to the cathode of the battery.
The electrodes switch functions, so anode becomes cathode, while cathode becomes anode, as long as the reversed current is applied, with the exception of diodes where electrode naming is always based on the forward current direction.
Connect the output line of the lead-acid Battery Smart Pulse Charger with the eight output ports of the machine, connect the red clip of the output line to the anode of the battery,and connect the black clip to the cathode of the battery.
I often put memories from different manufacturers in dual channel andin most cases worked well, the cathode when pushed to the limit(games, encoding, HD) failsafe, also can cause problems when you start the PC morning.
Connect the output line of the lead-acid 12V Battery iMaintaining Protector with the eight output ports of the machine, connect the red clip of the output line to the anode of the battery,and connect the black clip to the cathode of the battery.
Put the cutted CRT into the glass breaking working platform andtake out the cathode shield then collect the phosphors, the cone glass breaks down at the middle grid area and into the conveyor for bags, collect the phosphor from plain glass into bags.
Philipp Eduard Anton von Lenard(7 June 1862- 20 May 1947) was a German physicist andthe winner of the Nobel Prize for Physics in 1905 for his research on cathode rays and the discovery of many of their properties.
When the 2 electrodes of the recovery system are connected to the cathode and anode of the battery, the special pulse wave produced by the recovery system will act on the two electrodes of the battery continuously and change the movement state of e and H+.
Platinum and rhodium 30 platinum and rhodium 6 thermocouple B type thermocouple for the precious metal thermocouple BP is platinum andrhodium alloy which contains 30 rhodium 70 platinum the cathode BN is platinum and rhodium alloy Rhodium….
Stainless Steel Parts Generally speaking the anode USES aluminum oraluminum alloy as the anode while the cathode takes the lead plate and puts the aluminum and lead plate together in an aqueous solution which contains sulfuric acid oxalic acid….
The electricity splits some of the water in the acid into positively charged hydrogen and negatively charged oxygen, with the oxygen being attracted to the positively charged aluminum surface, where it reacts with the aluminum to form aluminum hydroxide and relatedcompounds(the hydrogen is attracted to the negatively charged electrode called the cathode, where it forms hydrogen gas bubbles and dissipates into the air).
Precision Steel Shaft Generally speaking the anode USES aluminum oraluminum alloy as the anode while the cathode takes the lead plate and puts the aluminum and lead plate together in an aqueous solution which contains sulfuric acid oxalic acid….
Glass Vacuum Coating Machine applied magnetron sputtering cathode discharge to ionize and deposit atoms(target) on the substrate(physicalvapor deposition) and melt metal wire or vaporize metallic particles with the resistance heating method in vacuum.
This equipment combined magnetron sputtering and vacuum evaporation techniques within the same coating equipment,the only use of magnetron sputtering cathode glow discharge to the target atoms spill and partially ionized film deposited on the substrate.
Since the current local concentration, the Joule heat generated by the cathode material locally explosively into plasma, the bias effect in the work piece compound with the reaction gas, and the plated layer is formed on the deposition surface of the work piece.
The micro-molecule generator rectifies power frequency(alternating current) into direct current and electrochemically decomposes alkaline water(H2O) in an electrolytic cell to form hydrogen ions(H+) and hydroxide ions(OH-),wherein hydrogen The ions move toward the cathode surface of the electrode plate to form hydrogen gas(H2), and the hydroxide ions move toward the anode surface of the electrode plate to form oxygen gas(O2).
Glass Vacuum Coating Machine 1 Glass VacuumCoating Machine applied magnetron sputtering cathode discharge to ionize and deposit atoms target on the substrate physicalvapor deposition and melt metal wire or vaporize metallic particles with the resistance heating method in vacuum Metalliza ting on the surfaces of substrate and mobile phone housing….
Blister copper content of 99 copper was prepared in advance as athick plate pure copper flakes as a cathode with sulfuric acid H2SO4 and copper sulfate CuSO4 mixture as electrolyte After power is applied copper dissolves from the anode into copper….
Generally speaking,the anode USES aluminum or aluminum alloy as the anode, while the cathode takes the lead plate, and puts the aluminum and lead plate together in an aqueous solution, which contains sulfuric acid, oxalic acid, chromic acid, etc.
Nickel electroplating is a process of nickel deposition on a part, immersed into an electrolyte solution and used as a cathode, when the nickel anode is being dissolved into the electrolyte in form of the nickel ions, traveling through the solution and depositing on the cathode surface.
When the current through the device is reversed, the electrodes switch functions, so anode becomes cathode, while cathode becomes anode, as long as the reversed current is applied, with the exception of diodes where electrode naming is always based on the forward current direction.
This equipment has concentrated a series of techniques and equipments including plasma treatments,high-end magnetronsputtering cathode, resistance evaporation plating device, rotating stand with high loading quantity, and automation control technology, characterized by reliable work, good uniformity the repeatability, quick deposition, strong adhesion, fine coating and so on.