Examples of using Decibel in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Reduces Decibel Level.
So mute, no more than 45 decibel.
A decibel is one tenth of a“bel”.
I will make journal entries, recording every decibel.
Reference tone minus 16 decibel will follow.
One decibel is equivalent to a one-tenth of a bel.
The unit of measure is the decibel(dB).
The Optimus+ Green decibel meter is ideal for….
For sound, its SI unit will be decibel(dB).
The noise decibel is much lower than international standard.
The unit of this measurement is the decibel(dB).
Decibel Hearing threshold- the human being can perceive sounds.
The next important measurement unit is Decibel(dB).
High decibel Beacon and backup alarm make person around easy to attention.
The unit of measurement for loudness is the decibel(dB).
The decibel(dB) is used to measure sound level.
It is measured with the sound level meter and its unit of measurement is the decibel(dB).
The Optimus+ Yellow decibel meter is ideal for vehicle noise measurement.
This figure is equal to 1 million times thejet engine sound(which reach 120-130 decibel loudness level).
The Universal Noise Dampening Package progressively reduces decibel level and shortens noise duration when used on a crossbow.
When organizing jobs on cattle farms,the noise level should not exceed 80 dBA(acoustic decibel).
The Universal Limb andFoot Stirrup Silencing Package progressively reduces decibel level and shortens noise duration when used on a crossbow.
With a level(manual or smartphone) it is important the area is little or no inclination, as this may cause an improper cabinet assembly andresult in a loss of substantial decibel absorbance.
Guitarist Chris Alfieristated in a June 17, 2015 interview with Decibel Magazine that,"Christa was from Concord, New Hampshire, the town that I live in.
The higher suction force makes the machine louder, but still not disturbingly,with only 65 decibel the maximum noise output.
Lt; start="977.1" dur="3.6"> For example,“Oh,we need to lower this decibel a little bit more…”>
One disadvantage of all amplitude modulation techniques(not only standard AM) is that the receiver amplifies and detects noise and electromagnetic interference in equal proportion to the signal. Increasing the received signal-to-noise ratio, say,by a factor of 10(a 10 decibel improvement), thus would require increasing the transmitter power by a factor of 10.