Examples of using Micrometer in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Disc Buttons for Micrometer.
Micrometer alignment and vacuum to fix components.
How to Use a Micrometer.
Gage/ caliper/ micrometer. Our inspection capabilities including.
Demonstrate how to use a micrometer.
Measurements can be made using a micrometer or an instrument of the same precision.
Japan Mutitoyo tubular inside micrometer.
Equipped with thread gauge, caliper, micrometer and other professional testing equipment.
Usually they must be larger than 1 micrometer.
Outside micrometer(aka micrometer caliper), typically used to measure wires, spheres, shafts and blocks.
Looks right, need a micrometer to tell.
Wear resistance YG6X tungsten carbide disc buttons for Micrometer.
Not every component can be measured with a micrometer, sometimes due to the delicate nature of the product.
The thickness of electroplating on surface of the Cold WaterPillar Taps is 8 to 12 micrometer.
In every micrometer caliper it can be fitted with a specialized spindle and anvils for specific measuring tasks.
One ounce per square foot is 1.344 mils or34 micrometers thickness.
Each type of micrometer caliper can be fitted with specialized anvils and spindle tips for particular measuring tasks.
Micro technology is technology with features near one micrometer(one millionth of a meter, or 106 meter, or 1im).
The distance in micrometers between the actual wavefront and the ideal wavefront is the wavefront aberration, which is the standard method of showing the aberrations of the eye.
These microplastics particles can be as small as 1 micrometer(one-millionth of a meter) to nano-proportions.
Adopts digital display micrometer eyepiece, no table, no input values, measurement data directly displayed on the screen, and display the test force, prompt information of the load time and frequency, etc.
The term micron and the symbol μ wereofficially accepted for use in isolation to denote the micrometer in 1879, but officially revoked by the International System of Units(SI) in 1967.
Basin pillar tap is practical and economical option in tropic countries, like Thailand, Kenya, Angola, Tanzania etc. The thickness of electroplating on surface of the Basinpillar tap is 8 to 12 micrometer.
Other basic inspect tooling like Calpers, Micrometer, Height gauge, Pin gauge, Thread gauge, Slot card and so on.
High dimensional control accuracy: the spindle accuracy of the machine tool can reach 0.003mm,the slider fine-tuning is controlled by micrometer, the dimensional control accuracy can reach 0.005mm, and the spindle speed can be within 2000-8000rpm.
Wear resistance YG6X tungsten carbide disc buttons for Micrometer Description and Advantage 1 The purity of the raw material is more than 99 95 the content of the impurity is very little and the physical property of the plate is more stable 2 Using….
Light microscopes allow a resolution of about 0.2 micrometer 200 nm, whereas electron microscopes can have resolutions as low as 0.1 nm(1 angstrom).
The size ranges from tens to a hundred micrometres.