Examples of using Power level in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Power levels of suction.
Check your battery power level.
His Power Level is over 200,000!
Automatic RF output power level control(ALC).
King's Power Level is growing higher! As Diane dances.
You can choose among the power levels below.
Warning. Power levels dangerously low.
When the color is more darker, the power level is stronger.
If the power level is not selected.
Connection distance is somewhat predictable andcan be controlled by adjusting the power level.
Before the power level 2.4W 48W.
The power level function enables you to adapt the amount of energy dissipated and thus the time required.
The mobile phone worksharder to get the signal out through the metal, which increases the power level.
Can change power level and time during the cooking cycle.
The new requirement lowers the no loadpower to less than 0.075W for the 6-36W output power level.
However, its power level requirements are basically constant while running.
The new requirement lowers the minimum no load power to less than0.075 Watt for the 6-18 Watt output power level.
Corrected sound power level depending on the model- no more than 42 decibels.
New models of compressors can reduce power consumption andreduce the corrected sound power level of the refrigerator.
If a power level other than the maximum(100% 900 W) is used, the water takes longer to boil.
Although the SAR is determined at the highest certified power level, the actual SAR of the phone while operating can be below the maximum value.
Tests for SAR are conducted usingstandard operating positions with the device transmitting at its highest certified power level in all tested frequency bands.
For example, laser pointers with a power level of lesser than 5mW will have a Class 3a or Class IIIa label on them.
SAR tests are conducted using standard operatingpositions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.
If you aren't sure which power level to use then start with a lower level and work your way up.
A meltdown may be caused by a loss of coolant, loss of coolant pressure, or low coolant flow rate orbe the result of a criticality excursion in which the reactor is operated at a power level that exceeds its design limits.
This is its running power level, which equates to the instantaneous rate at which energy must be generated and consumed to run the device.
Check the Power Status: If checked, and the power level is below critical, then a warning message will appear on the handheld alerting the user to plug in or turn off the Reader.
