Examples of using Signal source in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
Sir, we have located the signal source.
Change signal source and HDMI/ SDI cable, ensure there is HDMI/ SDI signal input.
Sir, we have located the signal source, but.
Change signal source and signal cable, ensure there is signal input.
Temporarily switch off all nearby radio signal sources.
Sir, we have located the signal source, but… What? It… it's a child.
And transmission equipments, management/control equipments, paging equipments,microphones and other signal source.
The GPS or radio time signal source sends time within an accuracy of 1 microsecond to the time server.
Enable the filmmaker to check the image from the 1:1 signal source without scaling.
Connect a stereo signal source(eg, a CD player) to the RCA socket inputs and check that this is received by the tuner or radio.
It uses Microwave Sensor as a control signal source to detect Movement of human or car.
Note that the 1μF bipolar capacitors are included to prevent DCcurrent flow due to any DC offsets at the signal source outputs.
It adopts microwave radar as a control signal source to detect any movement by people or car.
If you want to find a microphone, you think it is hidden through the house,then it is necessary to turn off any radio signal source through the house.
It utilizes Microwave Motion sensor as control signal sources, when one enters the detection fields, it will start the control load at once.
Adjust VR1 and VR2 for best sound from the tuner-you will have to temporarily disconnect the signal source to make each adjustment.
It utilizes Microwave Sensor as control signal sources, when people or car enters the detection field, it will start the controlled load at once.
A piezoelectric element may be driven by an oscillating electronic circuit orother audio signal source, driven with a piezoelectric audio amplifier.
It utilize microwave motion sensor rays as control signal sources, when moving object enters the detection field, it will start the controlled load at once. it is a active motion….
Headphones are a pair of small loudspeakers, or less commonly a single speaker,held close to a user's ears and connected to a signal source such as an audio amplifier, radio, CD player or portable Media Player.
In the case that multiple signal sources are being broadcast to the same zone, the signal with higher priority shall be able to override the signal with lower priority automatically.
You can use multiple applications to capture one single signal source, and each channel of XI100XE will not lower the frame rate or affect the working efficiency.
These contents are readable by the open source Signal clients.
Mother, please track the signal to its source.
The actuator requires a control signal and an energy source.
The principle of this system is that audio source signal is amplified by the amplifier and then the line splitter output to the speaker.
Shall we locate the hold and look for the source of that signal?
I think we should locate the hold and look for the source of that signal!
An actuator needs an energy source and a control signal.