Examples of using This grade in English and their translations into Malay
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
This grade cannot be hardened by thermal treatment.
In the annealed condition this grade is relatively easily machined;
This grade of matcha is bluish green and have delicious taste.
AGrain refining elements may be added to this grade at the option of the manufacturer.
This grade will appear on your transcript.
When everything is about this class and that instrument and this grade, it's… It just can't be all that growing up is about?
This grade can be produced on request by the process in hardened and tempered, soft annealed and ESR condition.
Welding of grade 8 may require special techniques aGrainrefining elements may be added to this grade at the option of the manufacturer.
That is why this grade is called"benchmark".
ASME maximum allowable design stress data forAlloy 347H reflects the higher strength of this grade in comparison to the lower carbon Alloy 347 grade. .
May be added to this grade at the option of the manufacturer.
Does that mean that if the company Declare fuel 31 December 2012 year for compliance with the technical regulations TC in the passport for products to be made normative values andactual test results confirming compliance with the requirements of this grade fuel vehicle technical regulations, and there should be no records about the requirements of regulations under which produced this kind of fuel? 1.
This grade is comprised of 20 to 30 percent chromium, which is a greater amount than many other nickel alloys.
In case the steel material is to be welded,the welding process supposed to be suitable for this grade of ASTM A106, and applicable for the high temperature working environment.
Application: This grade is mainly used in the mineral oil industry, especially the used engine oil or waste oil.
This grade is commonly used for cutlery- particularly blades of table knives and for some carving knives and similar.
In the annealed condition this grade is relatively easily machined, but if hardened to above 30HRC machining becomes more difficult.
This grade is described as light because of its relatively low density, and sweet because of its low sulfur content.
Application: Compared with XY1500WM, this grade is more superior in the refining of palm oil, soybean oil, in addition, it also can be used for refining fish oil.
This grade is least used of the commercially pure titanium grades, but that does not make it any less valuable.
Care needs to be taken as this grade solidifies fully austenitic, so is susceptible to hot cracking, particularly in constrained weldments.
This grading scale starts with painless, minor bleeding usually after a bowel movement occurs and ends at grade 4 where the hemorrhoid prolapsed or protrudes out of the rectum.
This is second grade.
Grade W54 This Division.
Despite this the grade can be machined using standard techniques.
This is military grade.
You probably learned this in grade 3 art class.
This High Grade Fabric mainly use to be shirting and dress.
It is this official grade that appears on the student's transcripts.