Examples of using Light intensity in English and their translations into Malayalam
{-}
-
Colloquial
-
Ecclesiastic
-
Ecclesiastic
-
Computer
High light intensity.
The conversion of DD toDT offers limited protection to high light intensity.
Light intensity detection.
Maxima can survive if light intensity is enough.
Measuring light intensity requires a meter, and they are sometimes expensive.
Next time we will look at light intensity on a cloudy day.
Light intensity in the wrong spectrum is detrimental to coral growth.
Orphek Atlantik Pendant Light Intensity and Distribution.
Next time,we will look at those proteins that are known to respond to light intensity/spectrum.
Measuring light intensity isn't very exciting!
All other components are used to control the light intensity and the cooling fans.
There are other ways to measure light intensity, such as a radiometer(which reports in radiometric units of watts or micro-watts.).
And the feedback is rathergood that xLedLight T8 produce equivalent light intensity of conventional T….
A quantum meter should report light intensity to at least 2,000 µmol·m²·sec(which is about the intensity of full-strength sunlight.).
Energy saving: Good degree of light transmission,up to 92-93%, less light intensity.
Place your corals in your aquarium based on the light intensity and water flow required for that species.
Hopefully this data will help the aquarist make an informed choice on what to expect from the individual LED fixtures andhow best to utilize them to achieve the desired coverage and light intensity.
This also happens to be in the spectrum ranges where light intensity is the least sensitive to our eyes.
Based on observations I made during my 18 years in Hawaii, the DD/DT cycle begins to regulate photosynthesis in shallow watercorals in early morning(generally when light intensity reaches 300 to 400 µmol·m²˖sec.).
One must keep inmind that a Lux reading only measures light intensity to which the human eye is most sensitive(green) and a Lux meter will not measure wavelengths over 580 nm.
Their zooxanthellae will be at a maximum rate of photosynthesis early in the morning, and their natural protective devices(the Xanthophyll Cycle)comes into play during mid-morning and protects them until light intensity drops in the late afternoon(assuming it is sunny all day.).
One must keep inmind that a Lux reading only measures light intensity to which the human eye is most sensitive(green) and a Lux meter will not measure wavelengths over 580nm.
Monochromacy(from Greek mono, meaning"one" and chromo, meaning"color")is the ability of organisms or machines to perceive only light intensity, without respect to spectral composition(color). Organisms with monochromacy are called monochromats.
The lens' focal length determines the magnification of the image projected onto the image plane,and the aperture the light intensity of that image. For a given photographic system the focal length determines the angle of view, short focal lengths giving a wider field of view than longer focal length lenses. A wider aperture, identified by a smaller f-number, allows using a faster shutter speed for the same exposure.
But it works,it captures approximately 33% light and thus the light intensity is a solid 200±10?mol m- 2 s- 1 for the frags.
As seen from the data there is analmost 30”X36” coverage of area where the light intensity is greater than 80 micromoles/m^2/sec, while still achieving high intensity of over 120 at 30” away.
Note: The charts beloware shown to depict the photoperiod time and light intensity of all four channels of light on the pre-installed programs.
For the purposes of this article,we are most concerned with the number of photons(light intensity- PPFD or PAR) that exceeds the Compensation Point, meets and exceeds the Saturation Point and how Dynamic Photoinhibition affects the rate of photosynthesis.
Jules Violle had proposed a standard based on the light emitted by 1 cm2 of platinum at its melting point(or freezing point),calling this the Violle. The light intensity was due to the Planck radiator(a black body) effect, and was thus independent of the construction of the device. This made it easy for anyone to measure the standard, as high-purity platinum was widely available and easily prepared.
These light intensities are easily achievable with today's lighting systems.

