Examples of using Inlet in English and their translations into Marathi
{-}
-
Ecclesiastic
-
Computer
Way Water Inlet Valve.
Inlet and outlet have screws.
Outlet and inlet have threads.
Before operating the compressor, seal the engine inlet.
Stainless steel inlet pipe(60cm).
One inlet two outlet Three phase four wire.
I stands for the distance between inlet and outlet(mm).
PUMP side inlet elements with primary pressure….
Check or replace the sealing element of the inlet valve.
One inlet three outlet Three phase three wire.
The using of strainer in the suction inlet ensures the safety of compressor.
The inlet could be either 50 or 63mm according to customer demand.
Before starting, the entire pump body and the inlet pipe must be filled with water.
Screened inlet and base prevent large solids from entering pump.
When cleaning or replacing the filter element, avoid foreign matters getting into the inlet valve.
Two inlet,multi-outlet connection terminal block for metering box.
And the finished product gas dew point:-23 C(atmospheric pressure) and the inlet temperature of 45 DEG C:<
Fan-motor unit: double inlet centrifugal fan, with V-belt driven motor.
The length of the ash cooler is not fixed, which is usually related with the capacity, ash temperature,and the rated distance between the inlet and outlet.
FJ6-JHT series single-pole One inlet,multi-outlet heavy current connection terminal block.
From the stainless steel multistage centrifugal pump installation technology, the suction pipe requires a strict seal condition, can not have pipe leak or leakage,otherwise it will destroy the vacuum degree at the water inlet of the pump, cause the pump water output is reduced, or it will too serious to draw water.
The valve inlet and outlet channels to use plastic cover or wax paper to be closed, so as not to enter the dirt.
After installation of many common garbage processors, the water leakage of the original water tank is not used,and the waste processor inlet is open to cancel the water storage function of the original water tank.
And the water inlet temperature, inlet water temperature is less than or equal to 32DEG C:: less than or equal to 32 DEG C.
Pressure institution: the installation on the backplate in front of the frame after several material cylinder inlet pressure, pressure is expected to head down after overcome the tension of the tension spring, pressure plate.
There are two garbage inlets, the small mouth is pressed on the sink, the small garbage enters the garbage bucket, and the sewage pipe is not blocked.
The multi-function spinning machine is special designed for ventilation fan industry work, mainly used for axial fan housing flanging, inlet throat forming, centrifugal fan front disc and air inlet flow forming work.
The rotating joint distributes the inlet water and return water evenly at the outlet end, which is convenient for maintenance and safe as well.
When you maintain or replace the air filter or inlet valve, no impurities is allowed to get into the engine of air compressor.
For polluted areas, the high efficient air inlet filter is necessary to stop the air pollution outside, to ensure access to the indoor air is truly fresh air.