Examples of using Vcc in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
What is File Extension VCC?
VCC refers to the module supply voltage.
Red line connecting VCC ramps of.
VCC and GND do not reversed, it would burn the chip.
DC+: positive power supply VCC.
VCC and GND do not reversed, it would burn the chip.
Connect them to a GND pin and to VCC as shown below.
VCC +5V power 4 must be connected to module.
A second pair that can be used for power supply GND and Vcc.
VCC 3V3 internal stabilizer output.
DC input interface:the terminal is connected to the VCC, the negative then GND.
VCC and GND do not reversed, it would burn the chip.
Fill out the page with the following information:Pin 1: VCC Pin 2: input Pin 3: GND.
Notice pin VCC_PIC, connected to connector JP1.
Buckled Analog Port: Handy,solid connection to 6 Analog inputs with VCC/GND.
Pin 19- VCC, supply voltage when the organizer is turned on.
In the component selection window, scroll down and select'VCC' from the'power' library.
VCC files are Uncommon Files primarily associated with VersaCheck Style.
In the Component Selection history section select VCC and place it next to the VDD pin.
VCC external 3.3V to 5V voltage can be directly connected to 5V and 3.3 V MCU.
Two of these are power lines: ground(GND) and+5 volts(VCC) from the computer power supply.
Boerstra was born in Voorburg,South Holland, and played his club cricket for Voorburg Cricket Club VCC.
Repeat the add process again and place a VCC part above the VCC pin of MYCONN3.
Just connect GND and VCC to the module and a varying voltage depending on light level is available on the third pin.
In 1996, together with the VSV TONEGIDO Voorburgse associations(football) and VCC(cricket) decided to close cooperation.
On-board level converter chip with 3.3VCC level output support 5V/3.3V VCC input perfect for MCU module expansion.
Proven performance synthetic engine oil specifically developed for vehicles manufactured by Volvo requiring an engine oil approved to VCC RBSO-2AE.
They indicate that the two power ports VCC and GND are really connected to a power source.
If you want this label VCC to be really connected to the equipotential VCC, it will have to be explicitly connected to an invisible power pin, thanks to a VCC power port.
When wiring up the VCC and GND symbols, the wire should touch the bottom of the VCC symbol and the middle top of the GND symbol.