Examples of using Z-axis in English and their translations into Polish
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Financial
-
Official/political
-
Programming
-
Computer
So that's my z-axis.
Negative Z-axis, ten degrees.
You add a third dimension, a z-axis.
Once Z-axis is at home, remove the bracket.
y-axis, z-axis. x, y, z.
Remember, the z-axis is popping out.
Move the spindle head down to the middle of Z-axis travel.
Raise the Z-axis up and command the C-axis to C90.
DPS is more precise than GPS and works on a Z-axis.
I'm sitting on the z-axis looking down at the doughnut.
Remember, t was how much we have gone around the z-axis.
So our z-axis goes straight through the center of the doughnut.
We are b away from the z-axis, so that distance is b.
Doesn't matter how much we have rotated around the z-axis.
So let's say I have the z-axis that goes straight up and down.
we're going to rotate this circle around the z-axis.
Similarly is with the Z-axis, means with the physical work.
then we have a z-axis.
We would have rotated around the z-axis 90 degrees, so now we're over here.
then t takes us around the z-axis.
If this is the z-axis, over here, this distance right here is always going to be b.
That's, remember, how much we're rotated around the z-axis right there.
The bracket will be removed after the Z-axis has been moved to home position after startup.
Continue to adjust the leveling screws until the bubble reads zero at both ends of Z-axis travel.
High performance AC servomotor is used on Z-axis eliminating the replacing possibility of carbon brush.
Raise the Z-axis out of the way and recall that,
and then my z-axis goes up like that. z-axis.
Then jog the turret along the Z-axis towards the spindle getting to the end of Z travel if possible.
So the center of each of these circles is b away from the origin, or from the z-axis, what we're rotating around.
Jog the Z-axis to bring the test indicator down to contact the table and zero the test indicator at the operator side of the table.