Examples of using Relay module in English and their translations into Romanian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Ecclesiastic
-
Computer
-
Programming
Relay Module 1 channel.
Blue Optoisolated 8 Relay Module.
Relay Module 8 channels.
I/O Relay Modules- Output.
Time dalay block(control relay module).
Time relay modules.
This type of devices can be controlled with relay modules.
Relay Module 4 channels.
Phoenix Contact offers a wide range of relay modules.
I/O Relay Modules- Analog.
They have ripped the DC Solenoids from his relay module as if he were some sort of animal.
X Relay Module 1 channel.
Scheme of the bridge between the positive poles of the relay module.
Relay Module 8 channels 24V.
Phoenix Contact has a selection of compact relay modules for space-saving applications.
Relay module(equal to yours from 8 channels).
The SW-OAM is a wireless relay module featuring audio and visual warning indicators.
The remaining wires, which correspond to the negative pole and to the takes of Earth,We will connect them directly to the device want to control through the Relay module, in my case a Plug domotic DIY;
Series 7S- Relay module with forcibly guided contacts 6 A.
Then we can see the table of connections between the Relay module, the PI's three branches, and Raspberry PI.
MPSBS- The relay module of the PSBS technical outputs.
There are options for an internal preselector amplifier and antenna relay module, offering you a true one-box installation.
The relay modules are suitable for use in zone 2 potentially explosive areas.
To avoid the disadvantages of permanently soldered relays, additional relay modules are often used in front of the inputs and outputs.
MP12A-DIN DIN Relay Module(12pcs) for Ethernet eHouse and eHouse 1 smart home controllers.
This conventional fire alarm& extinguishing panel is expandable up to 72 zones using expansionmodules(8 zones per module). Output expandability; 8 relay modules with 8 relays each.
An alternative to the relay module is the use of individual relays mounted on DIN rail(as standard 230V fuses).
The idea is to put a power inlet and that where there is electridicad run the raspberry and feed channels of the module relay for turn on/ turn off equipment, but, When there is electricity no(power outage)the raspberry(without relay module) keep running with the powerbank(until battery but as the probe and hold a 6 hours).
You can use the new versions of the highly compact PLC-INTERFACE relay modules in these areas since they have the required Ex approvals for zone 2(ATEX, class 1 division 2).