Examples of using Digital inputs in English and their translations into Russian
{-}
-
Official
-
Colloquial
Digital inputs(switches).
Integrated analogue and 4 digital inputs.
The digital inputs are of type SchmittTrigger with.
Switches connected to the digital inputs.
Can also be used as digital inputs, for example, for push button switch.
To connect the power consumption digital inputs.
One module has 4 digital inputs and outputs.
Is a communicaton module PROFINET plus 5 universal digital inputs.
Digital inputs, terminals 5-8, are of extra-low voltage type.
Is a communicaton module RS 232/485 plus 5 universal digital inputs.
Configurable digital inputs and outputs, analog output, RS-422/SSI.
Is a communicaton module PROFIBUS DP plus 5 universal digital inputs.
Digital inputs are available in 2-channel, 3- channel, or 8-channel versions.
In some cases it may be useful to turn of the digital inputs in Adc.
Digital inputs can be used to monitor switching contact devices.
M12 plug connector for the voltage supply and digital inputs and outputs.
How the digital inputs are connected to X1A depends on the Smart Grid application.
Is a universal analogue output plus 5 universal digital inputs.
Digital inputs support both 2 Channel Stereo and Multi Channel audio signals.
Press this button to cycle between analogue,optical and digital inputs.
The control unit has two digital inputs that can be used for external operation functions.
Fire and security alarm systems are connected to the digital inputs of the MiniEM.
Maximum four digital inputs are used to activate the corresponding power limitation level.
Is a 10-channel digital output with 10x relays plus 8 digital inputs.
The digital inputs of Ethernet controllers are connected via“Pull Up” resistors to the controller power supply(3V3) voltage.
Is a universal 2-channel analogue output plus 8 universal digital inputs.
These modules have 8 digital inputs/ 8 relay outputs, are powered from the 220V network, and are controlled via the Modbus TCP protocol.
Acquisition of special operation status with analogical and digital inputs.