Examples of using Wact in English and their translations into Russian
{-}
-
Official
-
Colloquial
Cases where Wact< Wice_HILS.
Wact kWh Actual cycle work of ETC.
The total work Wact[kWh] is calculated as follows.
Wact is the actual cycle work, kWh.
Instantaneous engine power values shall be integrated over the test cycle to calculate the actual cycle work Wact kWh.
Wact shall be between- 15 per cent and +5 per cent of Wref.
Instantaneous engine power values shall be integrated over the test cycle to calculate the actual cycle work Wact kWh.
Wact shall be between 85 per cent and 105 per cent of Wref.
The actual cycle work Wact(kWh) shall be calculated based on engine feedback speed and torque values.
Wact shall be between 85 per cent and 105 per cent of Wref.
The cycle work Wact(kWh) shall be calculated based on engine feedback speed and torque values.
Wact shall be between 85 per cent and 105 per cent of Wref.
The cycle work Wact(kWh) shall be calculated based on engine feedback speed and torque values.
Wact shall be between 85 per cent and 105 per cent of Wref.
The actual cycle work Wact is used for comparison to the reference cycle work Wref and for calculating the brake specific emissions.
Wact is the actual engine work in the HEC test, kWh.
The actual cycle work Wact(kWh) shall be calculated using each pair of engine feedback speed and torque values recorded.
Wact shall be between- 15 per cent and+ 5 per cent of Wref.
The actual cycle work Wact(kWh) shall be calculated using each pair of engine feedback speed and torque values recorded.
Wact actual cycle work as determined in paragraph 3.9.2., kWh.
The actual cycle work Wact(kWh) must be calculated using each pair of engine feedback speed and torque values recorded.
Wact actual cycle work as determined according to paragraph 3.9.2.
The actual cycle work Wact is used for comparison to the reference cycle work Wref and for calculating the brake specific emissions see paragraphs 4.4. and 5.2.
Wact, cold is the actual cycle work of the cold start test, kWh.
Wact, hot is the actual cycle work on the hot start test, kWh.
Wact, cold is the actual cycle work on the cold start test, kWh.
Wact, hot is the actual cycle work of the hot start test, kWh.
Wact is the actual cycle work as determined according to paragraph 7.7.1., kWh.
Wact is the actual cycle work as determined according to paragraph 7.8.6., kWh.
Wact is the actual cycle work as determined in accordance with paragraph 7.8.6., kWh.