Examples of using Ferrite in English and their translations into Serbian
{-}
-
Colloquial
-
Ecclesiastic
-
Computer
-
Latin
-
Cyrillic
Ferrite, pearlite and inclusions.
The plastic band is coated with a ferrite layer.
Compared with ferrite inductors, the advantages of amorphous inductors are.
However, such materials should not contain ferrite more than 2%.
Pearlite and ferrite layers are labelled to differentiate the phase structure.
It has a good performance-price ratio andcan replace ferrite ring.
Now, the light splotches are ferrite, and the more ferrite present.
Usually they have a cylindrical thickening,inside which is a ferrite filter.
You can remove ferrite cores from computers, useless printers, old monitors, or scanners.
Austenite is not magnetic or weak magnetic,martensite or ferrite is magnetic.
At this time the ferrite has basically no carbon supersaturation, carbide is also a stable carbide.
Austenite is non-magnetic or weakly magnetic,martensite or ferrite is magnetic.
Namely, bismuth ferrite can be used in a new and original manner to develop water purifying technologies.
Austenite type is non-magnetic or weak magnetic,martensite or ferrite is magnetic.
Barium ferrite has a hexagonal crystal structure with good magnetic characteristics through crystal C axes.
Austenitic type is non-magnetic or weakly magnetic,martensite or ferrite is magnetic.
At this point, the performance of ERW bushing in ferrite is basically no carbon supersaturation, and carbide is also a stable carbides.
The austenite type is nonmagnetic or weakly magnetic,and martensite or ferrite is magnetic.
Is home to the permanent magnetic ferrite production, processing, enterprise development, magnet manufacturers magnet manufacturers.
The above-mentioned austenite is non-magnetic or weak magnetic,and martensitic or ferrite is magnetic.
Finally, duplex stainless steels combine the benefits of austenite and ferrite to provide enhanced decay resistance and beefed up strength and durability.
The magnets used in speakers andheadphones are mostly neodymium magnets and ferrite magnets.
Duplex stainless steels have a mixed microstructure of austenite and ferrite, the aim being to produce a 50:50 mix although in commercial alloys the mix may be 60:40.
It is mentioned above that austenite is non-magnetic or weakly magnetic,and martensite or ferrite is magnetic.
Duplex stainless steels are a mix of austenite and ferrite structures, the aim being to produce a 50:50 mix(although in commercial alloys the mix may be closer to 40:60).
It is also a tempering organization of martensite,a mixture of ferrite and granular carbides.
After the solution treatment of steel structure of austenite, andsometimes there are a small amount of ferrite.
However, for thicker castings such as machine tools,increasing the Si/ C value increases the ferrite content at the thick section, but reduces the strength.
For radio frequency use, transformers are sometimes made from configurations of transmission line, sometimes bifilar or coaxial cable,wound around ferrite or other types of core.
Duplex stainless steel balls have a mixed microstructure of austenite and ferrite, the aim being to produce a 50/50 mix, although in commercial alloys, the mix may be 40/60 respectively.