Examples of using Switch lets in English and their translations into Slovak
{-}
-
Colloquial
-
Official
-
Medicine
-
Financial
-
Ecclesiastic
-
Official/political
-
Computer
-
Programming
A Mono switch lets you sum the left and right inputs.
Instead of flicking a switch to turn the light off and on,a light dimmer switch lets you turn….
The depth switch lets you increase this bend, creating a deeper effect.
Depth and rate controls provide excellent tonal adjustments,while a 3-way toggle switch lets you pick between the three modes.
The overdrive switch lets you choose between a clean or crunchy sound.
People also translate
Fixed bias operation means you can run the power amp without any maintenance,while a bias switch lets you swap in EL34 power valves in an instant.
The phase switch lets you engage the phase inversion to minimise the amount of feedback produced.
When passive instruments are used, a unique'bright' switch lets you compensate for high frequency loss due to longer cables.
The Effect Switch lets you select between the modulation effects, which include Flanger, Vibrato and Phaser.
An internal threshold trimmer allows for advanced tone shaping,while an active/passive switch lets the pedal work with both active and passive instruments.
A two-position contour switch lets you control attack and clarity levels dependent on the application.
For the power tubes, you can change the operating point of the vacuum tubes by using the‘BIAS' switch to select either a clear and modern sound or an easily distorting vintage sound,and the‘Reactor' switch lets you vary the amount of feedback to the power amp, changing the damping factor to obtain a more dynamic, wide-ranging, and crisp sound.
The Clean/Overdrive switch lets you change instantly between crystal clear clean to warm distortion;
To ensure you're always optimised for any environment,the additional ground/lift switch and phase switch lets you adjust the CabClone's signal to be unaffected by its surroundings or connected devices.
The Script switch lets you switch from the vintage-inspired"Script Logo" pedal, with its more subtle and organic effect.
A 3-band EQ plus drive and bright switch lets you dial in the tones to exactly how you like, ranging from crystal clean to overdrives with real punch.
The TAILS Switch lets users choose whether the reverb effect continues after being switched to bypass, or whether it stops immediately.
The three position switch lets you select from these three sought after reverbs whilst the Reverb knob acts as a wet-dry control.
The normal/hot switch lets you set your pedal in the original Tumnus mode or in a high-gain setting ideal for increasing sustain and saturation;
The TAILS Switch lets players choose whether reverb continues to play after switched, to bypass with a set decay time, or whether it stops immediately.
This switch lets you recreate a vintage-style tube amp with more'sag', or a more modern amp-style overdrive with enhanced articulation and pick-attack.
A 3-band EQ plus shape switch lets you dial in the tones to exactly how you like, with the'Shape' option giving you a great"go to" setting to optimise your sound.
The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.
The Ground Lift switch lets you totally separate the input and output signal grounds, when appropriate, to isolate two systems, thereby reducing hum and ground-loop noise.
A handy bias switch lets you swap in EL34 power valves in an instant without worrying about bias adjustments- perfect for changing the response from an American-style tone to a British-style sound, should you prefer.
Channel ON switches let you switch individual channels into or out of the mix.
One aspect that's different from the old model is the additional clean switch, letting you create crystal clean tones with extra headroom and a smooth character.
You can also connect an A/B/Y box for on the fly-channel switching, letting you instantly switch sounds during a performance.
You also have access to true bypass switching, letting you retain your signal chains character and integrity whether the pedal is on or off.
In addition to the NTMB+F electronics,this signature Ibanez Bass also features a mid-frequency select switch, letting you instantly switch between 250Hz, 500Hz, and 800Hz to create a more dynamic and ideal tone when needed.