What is the translation of " MANDREL " in Slovenian?

• trn
• vreteno
• trna
• trnom
• vretenu

Examples of using Mandrel in English and their translations into Slovenian

Pyramid Sleeve Mandrel.
Piramida rokavi vreteno.

Mandrel Of Wedge-open Type.
Trn Od Wedge-odprtega tipa.

Good strength of mandrel main shaft;
Dobra moč trn glavne gredi;

Old grinding wheel with a mandrel;
Staro brusilno kolo z vdolbino;

Excellent mandrel stability; long-time coiling.
Odlična stabilnost trn; dolgoletni navijanje.

Micro-Insert with Mandrel Interior.
Mikro Vstavi s vreteno notranje.

Check mandrel with ground C-reference for setting Macro compatible chucks.
Preverite trn z ozemljitveno C-referenco za nastavitev makro kompatibilnih glav.

Micro-Insert with Mandrel Interior.
Micro-vstavite s trna za notranje zadeve.

The mandrel is suitable for large tension coiling and coiling of pipeline steel of X80, X100, X120.
Trna je primeren za velike napetosti navijanja in navijanjem cevovoda jekla X80, X100, X120.

Can also be used with mandrel 402.
Uporabite ga lahko tudi z vpenjalnim trnom 402.

For convenience, the mandrel is made hole under the nail head. In place.
Za udobje, je trn iz luknje pod nohtom glavo. V mestu.

Blind rivets are tubular and are supplied with a mandrel through the center.
Slepe zakovices cevaste in so opremljeni s trnom skozi središče.

Avoid impact on the mandrel grease system caused by coil seizing, etc.
Izogibajte vpliv na sistem trn mast s tuljavo povzročajo zasegu, itd.

Additionally, every moving track of the dynamic jaw is an arc with the mandrel as its center.
Poleg tega je vsak gibljiv del dinamične čeljusti lok s čepom kot njegovim središčem.

Guarantee clear oil passage in the mandrel through cooling of the main shaft;
Zagotavljajo jasno olja prehod na vretenu s hlajenjem glavne gredi;

The screw mandrel of this machine is flexible, so the conveying line can be arranged according to the space curve.
Vijak trn tega stroja je prilagodljiva, tako da se transportno linijo lahko razporejena po vesolju krivulje.

Automatic pneumatic central mandrel lubricating device(ADS).
Avtomatska pnevmatska centralna mazalna naprava trna(ADS).

The tube is wound on a round mandrel with an external diameter of 35-50 mm with a pitch(distance between the center of the tube) 12 mm.
Cev je navita na okrogli trn z zunanjim premerom 35-50 mm s korakom(razdalja med središčem cevi) 12 mm.

No gap between adjacent segment when the mandrel is in a perfect circle.
Št vrzel med sosednjimi odseka, ko je trn v popolni krog.

This is done either by using a slot for a mandrel, which is mounted on a stand for placing a sharpened saw on it, or by installing special stops on a stand that fix the saw blade at the required angle to the grinding wheel.
To se naredi bodisi z uporabo utora za trn, ki je nameščen na stojalu za postavitev ostre žage na njej, ali z namestitvijo posebnih postankov na stojalo, ki pritrjuje žagin list pod potrebnim kotom na brusno kolo.

Approximately 3/ 4 lengths, and then using the mandrel until it touches the jumper cap.
Približno 3/ 4 dolžine, nato pa z uporabo vretenu, dokler se ne dotakne skakalec cap.

Custom Macro Chucks with precision mandrel allowing user install and remove from tombstone application….
Custom Makro Chucks s preciznim trnom, ki omogoča uporabniku namestiti in odstraniti iz nadgradnje….

Remove the brass handles and remove the damage to the surface and polish up using the Dremel 8200, EZ SpeedClic Mandrel and the Impregnated Polishing Wheel(520).
Odstranite medeninaste ročaje, popravite poškodovano površino in spolirajte z orodjem Dremel 8200, vpenjalnim trnom EZ SpeedClic in impregniranim polirnim kolutom(520).

Then it is bent on the horn of the anvil or mandrel, so that the mandrel will enter the hole formed after bending.
Potem je upognjen na rogovu nakovca ali trna, tako da bo trn vstopil v luknjo, nastalo po upogibanju.

The processing capability is very comprehensive, it can bend in both directions and freely control the mandrel expansion and contraction, so it can process more and more complex. shape.
Zmogljivost obdelave je zelo obsežna, lahko se upogne v obe smeri in prosto nadzoruje širitev in krčenje trna, tako da lahko obdeluje vse bolj kompleksno. obliko.

Corresponding results, produced by decreasing mandrel sizes, indicate the degree of elasticity of the coating.
Ustrezni rezultati, ki jih proizvajajo z zmanjšanjem velikosti mandra, kažejo stopnjo elastičnosti prevleke.

After the completion, the workpiece is placed on the mandrel, and on it is necessary to perform the following operations.
Po zaključku je obdelovanec nameščen na trnu, na njej pa je potrebno opraviti naslednje operacije.

The System 3R 3R-606 MAXX brand 3R-606 Control Rod Macro compatible check mandrel is 100% Compatible with System 3R Macro compatible and macro standards products.
Sistem 3R 3R-606 MAXX blagovna znamka 3R-606 kontrolna palica Macro kompatibilen kontrolni trn je 100% Združljiv s sistemom 3R Macro, združljivim z makro standardi in izdelki.

These include the sleeve, designed to melt the surface from the outside, and the mandrel, necessary for melting the surface of the socket directly at the connecting part from the inside.
Ti vključujejo rokav, ki je namenjen za taljenje površine od zunaj, in trn, potreben za taljenje površine vtičnice neposredno na povezovalni del od znotraj.

Quick Overview The System 3R 3R-606 MAXX brand 3R-606 Control Rod Macro compatible check mandrel is 100% Compatible with System 3R Macro compatible and macro standards products Check mandrel with….
Hitri pregled Sistem 3R 3R-606 MAXX blagovna znamka 3R-606 kontrolna palica Macro kompatibilen kontrolni trn je 100% Združljiv s sistemom 3R Macro kompatibilen in izdelki makro standardov Preverite trn z….