Examples of using Pipes with a diameter in English and their translations into Slovenian
{-}
-
Colloquial
-
Official
-
Medicine
-
Ecclesiastic
-
Financial
-
Computer
-
Official/political
-
Programming
You can use pipes with a diameter of 25 cm or 32 cm.
For laying air ducts use PVC sanitary pipes with a diameter of 110 mm.
Plastic pipes with a diameter of 20, 25, 32 mm from the depth pump.
Pretty well proven polyethylene pipes with a diameter of 25 mm.
To this end, pipes with a diameter of 32 or 40 mm are driven into the ground at the junction of the pallets.
Such constructions can be made of pipes with a diameter of 38-40 mm.
Steel pipes with a diameter of 15-25 mm are more affordable and can be performed with sharp corners or with smooth lines.
Manufacturers offer pipes with a diameter of 20- 1200 mm, which have the following advantages:.
In the long retaining wall every 2 mshould be made holes for PVC pipes with a diameter of 6 cm for water flow.
The legs are made of plastic pipes with a diameter of 24 mm, the structure is fixed to the countertop with metal clamps and self-tapping screws….
The diameter of the pipes can be arbitrary,but usually for such purposes use pipes with a diameter of 12 centimeters.
It is recommended to join pipes with a diameter of PN 20 and PN 25 using welding.
Flow Controller for Liquid Media ANDSW1/2is for controlling the flow of liquid media in pipes with a diameter of 1/2″ to 8″.
As a material for the foundation, pipes with a diameter of 100 to 200 mm are used for this purpose.
Use asbestos or plastic pipes with a diameter of 10-12 cm. Place them at a distance of 50-80 cm from the seedling(depending on the growth power of the variety) and deepen them by at least 40 cm.
Hand-held devices are able to work with pipes with a diameter of not more than 50 mm.
Manually, you can weld pipes with a diameter of up to 40 mm, and for working with larger material(from 50 mm) it is better to use an assembly tool.
To prevent this phenomenon, holes are drilled in the pipes with a diameter of 5 mm, up to 15 pcs per running meter.
For bath furnaces it is recommended to use pipes with a diameter of 500-600 mm and a thickness of 7-13 mm, but this is not mandatory, the choice of the size of the metal pipe depends on the area of the steam room and the required volume of water.
For laying pipes, preference is given to perforated PVC pipes with a diameter of 50-100 mm in the lengths of 2500 mm.
Based on experience, many experts recommend laying pipes with a diameter of 40 mm with a capacity of 50 liters per minute on an area of 1 ha.
However, if you do drainage with your own hands,it is cheaper to buy plumbing PVC pipes with a diameter of 100 mm and make holes in them with step 40- 60 mm independently.
To this end,special movable rods are inserted into the pipes with a diameter of approximately 30-40 mm, which enter the stopper at the desired level with an M8 screw.
Necessary materials To make the table, I used: Pipes with a diameter of 20 mm: 8 pieces of 15 cm, 4 pieces of 10 cm, 8 bases, 6 T-shaped couplings and one 80 cm pipe….
For layout of the apartment is enough pipe with a diameter of 20mm.