What is the translation of " POLYETHER " in Slovenian?

• polietra
• polieter
• polietrnih
• polieternih
• polieterske

Examples of using Polyether in English and their translations into Slovenian

Filling: Polyether foam.
Polnilo: pena iz polietra.

Polyether polyols- 40 C.F.R. Part 63, Subpart PPP;
Polieter polioli- ZZP 40, 63. del, poddel PPP.

Preferably use a polyether mattress.
Prednostno uporabite polietrski žimnico.

CASE polyether is also called elastomer polyether.
Primer polieterja se imenuje tudi elastomerni polieter.

It is recommended to use polyether series.
Priporočljivo je uporabljati serije polietra.

Hot Tags: polyether tpu plastic pellets manufacturers, factory, high-quality, price.
Hot Tags: proizvajalci polietra tpu plastičnih peletov, tovarniške, visokokakovostne, cene.

COMPOSITION: Core: Coconut fibre layer and polyether foam.
SESTAVA: plast kokosovih vlaken in polieterna pena.

Mm thick with a core of 15 mm polyether and 15 mm padding on each side.
Debelina 50 mm z jedrom iz poliestra debeline 15 mm in polnjenjem debeline 15 mm na vsaki strani.

The tensile strength of polyester TPU is nearly 60MPa and the elongation is nearly 410%, while that of polyether TPU is 50MPa andgt;30%.
Natezna trdnost poliestrskega TPU je skoraj 60MPa in raztezek skoraj 410%, medtem ko je polieter TPU 50MPa ingt; 30%.

Mainly divided into polyester type and polyether type, with wear resistance, oil resistance, transparency and good elasticity.
Veinoma je razdeljen na tip poliestra in polieterja, odpornosti proti obrabi, odpornosti na olje, preglednosti in dobre elastinosti.

Active Molecules Carrier: The Pebax® 2533 SA 01 structure consists of regular linear chains of rigid polyamide and soft polyether segments.
Aktivni prenašalec molekul: Pebax® 2533 SA 01 je sestavljen iz togih linearnih verig poliamida in mehkih polietrnih segmentov.

Polyether TPU has the characteristics of low temperature resistance, hydrolysis resistance, anti-fungal and anti-microbial characteristics;
Polieter TPU ima značilnosti odpornosti na nizke temperature, odpornosti na hidrolizo, proti glivicam in protimikrobnih lastnosti;

Hydrolysis resistance: TPU Resin's water turbidity performance is good, 1 to 2 years will not occur significant hydrolysis, especially polyether series better.
Odpornost proti hidrolizi: učinkovitost vode TPU Resin je dobra, od 1 do 2 let ne bo prišlo do pomembne hidrolize, še posebej polieterske serije.

MOL Group is in the final stages of selecting the licensor for polyether polyol technology as well as the contractor for the engineering of the utilities and other facilities.
Skupina MOL je v sklepni fazi izbora dajalca licence za tehnologijo polietrnih poliolov ter izvajalca za inženiring infrastrukture in drugih objektov.

The license agreements signed with Evonik and thyssenkrupp, will enable MOL to produce propylene oxide, a key component for the production of polyether polyols.
Licenčni dogovori, podpisani z Evonik in thyssenkrupp, bodo Skupini MOL omogočali proizvodnjo propilen oksida, ključne komponente za proizvodnjo polieternih poliolov.

In the case of products incorporating‘yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped' the tolerance is 20% in respect of the yarn.
Za izdelke, ki vsebujejo„prejo iz poliuretana, laminirano s fleksibilnimi segmenti iz polietra, povezano ali ne“, je to odstopanje pri preji 20%.

Pebax® is a thermoplastic elastomer(TPE-A) or a flexible polyamide without plasticiser consisting of a regular linear chain of rigid polyamide segments and flexible polyether segments.
Splošne informacije Pebax® je termoplastični elastomer(TPE-A) sestavljen iz linearne verige togih poliamidnih segmentov in fleksibilnih polieternih segmentov.

In the case of products incorporating"yarn made of polyurethane segmented with flexible segments of polyether whether or not gimped" this tolerance is 20 per cent in respect of this yarn.
Za izdelke, ki vsebujejo„prejo iz poliuretana, laminirano s fleksibilnimi segmenti iz polietra, povezano ali ne“, je to odstopanje pri preji 20%.

Polyimide is aromatic heterocyclic polymer molecular structure of the compounds containing imide group chain, English Polyimide(PI), can be divided into benzene PI, soluble PI, polyamide imide(PAI) and polyether imide(PEI) four.
Poliimid je aromatična heterociklične polimer molekularno strukturo spojin, ki vsebujejo imidnih skupine veriga, angleški Poliimid(PI), delimo v benzena PI, PI topne, poliamid imidnih(PAI) in polietra imidnih(PEI) štiri.

In the case of products incorporating‘yarn made of polyurethane segmented with flexible segments of polyether, whether or not gimped', this tolerance is 20% in respect of this yarn.
Pri izdelkih, ki vsebujejo„prejo iz poliuretana, laminirano s fleksibilnimi segmenti iz polietra, povezano ali ne“, je pri preji dovoljeno odstopanje 20%.

Efsa concluded that this substance is not a safety concern for the consumer if used as co-monomer up to 0.3% w/w, based on the final material in the manufacture of polyether ether ketone plastics;
Agencija je ugotovila, da snov ne predstavlja tveganja za varnost potrošnikov, če se uporablja kot komonomer do masnega deleža 0,3%, izračunanega na podlagi končnega materiala v proizvodnji polimernega materiala polieter-eter-keton.

Ms. Liu Huanhuan, an analyst at Tiantian Chemical Network, said that in 2017, the global polyether production capacity exceeded 12 million tons, of which China is the largest polyether producer in Asia and the world, and China's polyether production in 2017.
Liu Huanhuan, analitik na Tiantian Chemical Network, je dejala, da je svetovna proizvodnja polietra v letu 2017 presegla 12 milijonov ton, od katerih je Kitajska največji proizvajalec polieter v Aziji in svetu, in kitajsko polietrsko proizvodnjo v letu 2017.

It is a kind of amorphous high performance polymer, which is made of engineering plastics made by amorphous PEI(polyether imide) through high temperature extruder.
Gre za nekakšen amorfni polimer visoke zmogljivosti, ki je izdelan iz inženirske plastike, ki jo z visokotemperaturnim ekstruderjem izdela amorfni PEI(polieter imid).

One of the most concentrated areas of PPG and TDI resources, Jinhua Chemical Industry Group has an annual output of 130 thousand tons polyether unit, and 50 thousand tons of TDI unit in the first phase of Liaoning Jinhua is built, and the other northwest, southwest and Hercynian areas will also be the key areas for future development of the polyurethane industry.
Eden od najbolj zgoščenih področij virov PPG in TDI, Jinhua Chemical Industry Group ima letno proizvodnjo 130 tisoč ton polieterske enote in 50 tisoč ton TDI enote v prvi fazi Liaoning Jinhua je zgrajena, drugi pa severozahodno, jugozahodno in hercinska območja bodo tudi ključna področja za prihodnji razvoj poliuretanske industrije.

The planned new industrial complex consists of the HPPO plants having 200 kt/year propylene oxide production capacity, several production lines for polyether polyols, utilities and other infrastructural investments.
Načrtovan nov industrijski kompleks bodo sestavljali HPPO enota s kapaciteto proizvodnje 200 kiloton propilen oksida na leto, več proizvodnih linij za polietrne poliole ter druge infrastrukturne investicije.

Polyurethane elastomers consist of soft segments(oligomeric polyols, which are mainly classified into polyester, polyether, and polyolefin polyols) and hard segments(diisocyanates and chain extenders).
Poliuretanski elastomeri so sestavljeni iz mehkih segmentov(oligomernih poliolov, ki se uvrščajo predvsem v poliester, polieter in poliolefinski polioli) in trdi segmenti(diizocianati in polnila verige).

A list of the world's major polyimide production enterprises and production capacity in the table below, including General Electric(GE) Company production of polyether imide(Ultem®) dominance in thermoplastic products, is currently the world's only large-scale production of thermoplastic polyimide supplier.
Seznam svetovnih večjih Poliimid proizvodnje podjetja in proizvodna zmogljivost v spodnji tabeli, vključno s splošno Electric(GE) podjetja proizvodnjo prevladujočega polietra imidnih(Ultem®) v izdelkih termoplastičnega, trenutno je na svetu le velikoserijske proizvodnje termoplastov Poliimid dobavitelja.

Polyurethane thermoplastic elastomer, also known as thermoplastic polyurethane rubber, referred to as TPU, is an(AB) n-block linear polymer, A is a high molecular weight(1000-6000) polyester or polyether, B is 2-12 straight The diol of the chain carbon atom, the chemical structure between the AB segments is linked with a diisocyanate, usually an MDI.
Poliuretanski termoplastični elastomer, znan tudi kot termoplastični poliuretanski kavčuk, skrajšan kot TPU, je(AB) blok linearni polimer, A je poliester poliestra z visoko molekulsko maso(1000-6000) ali polieter, pri čemer B vsebuje 2 V primeru diolov 12 atomov ogljikovih atomov z ravno verigo, kemična struktura medAB segmenti povezuje diizocianat, običajno difenilmetan diizocianat(MDI).

Polyurethane thermoplastic elastomer, also known as thermoplastic polyurethane rubber, referred to as TPU, is an(AB) n-type block linear polymer, A is a high molecular weight(1000-6000) polyester or polyether, and B is a polymer containing 2-12 straight For the chain carbon diol, the chemical structure between AB segments is connected by diisocyanate, usually MDI.
Poliuretanski termoplastični elastomer, znan tudi kot termoplastični poliuretanski kavčuk, skrajšan kot TPU, je(AB) blok linearni polimer, A je poliester poliestra z visoko molekulsko maso(1000-6000) ali polieter, pri čemer B vsebuje 2 V primeru diolov 12 atomov ogljikovih atomov z ravno verigo, kemična struktura medAB segmenti povezuje diizocianat, običajno difenilmetan diizocianat(MDI).