What is the translation of " TITANIUM AND TITANIUM " in Slovenian?

• titana in titanove
• titanove in titanove
• titana in titanovih

Examples of using Titanium and titanium in English and their translations into Slovenian

Titanium and titanium alloys.
Titanove in titanove zlitine.

(4) Effect of carbon Carbon is also a common impurity in titanium and titanium alloys.
(4) Vpliv ogljika Ogljik je tudi pogosta nečistoča v titanovih in titanovih zlitinah.

Material: titanium and titanium alloy.
Material: titana in titanove zlitine.

In 1970, it gained 250,000 benefits due to the use of titanium and titanium alloy equipment.
Leta 1970 je pridobila 250.000 koristi zaradi uporabe opreme iz titana in titanovih zlitin.

Titanium and titanium alloys for the aerospace industry.
Titan in titanove zlitine za vesoljsko industrijo.

Metal implant was the most important performance is forming, machine and polishing, in the expected lifetime must remain functional in subjected to fatigue, wear, corrosion and impact load does not deteriorate, titanium and titanium alloy with all the above requirements.
Kovinski vsadek je najbolj pomembna učinkovitost oblikovanja, stroj in poliranje, v pričakovanega obdobje mora ohraniti funkcijo, v utrujenost, obrabi, koroziji in vpliv obremenitve ne bo, slabše, titana in titanovih zlitin, spoznati vse zgoraj navedene zahteve.

Titanium and titanium alloys are metals with phase change.
Titanove in titanove zlitine so kovine s fazno spremembo.

Existing titanium seamless pipe production technology mature, product availability, stability, but for the special requirements of pipe, titanium seamless pipe production difficulty larger, such as titanium and titanium alloy thin-walled tubes, the length of more than 14m long titanium tubes;
Obstoječe titana tehnologije proizvodnje brezšivnih cevi zrel, razpoložljivosti izdelkov, stabilnost, vendar za posebne zahteve cevi, titanov brezšivnih cevi proizvodnje težave večje, kot iz titana in titanove zlitine tankostenski cevi dolžine več kot 14m dolgoTitan cevi;

Titanium and titanium products, including waste and scrap.
Titan in titanovi izdelki, vključno z odpadki in ostanki.

At present, pure titanium and titanium alloy are widely used in industry.
Trenutno se čista titana in titanove zlitine pogosto uporabljajo v industriji.

Titanium and titanium alloys have three special functional applications:.
Titanove in titanove zlitine imajo tri posebne funkcionalne aplikacije:.

Physical properties: The elastic modulus E of titanium and titanium alloys is small, only about half of the steel, so the ratio of a0.2/E reflecting the size of the stamping rebound is much larger than that of steel.
Fizikalne lastnosti: Modul elastičnosti E iz titanovih in titanovih zlitin je majhen, le približno polovica jekla, zato je razmerje a0,2/ E, ki odraža velikost odtiska, veliko večje od razmerja jekla.

Titanium and titanium alloys can be prepared according to the difference in properties.
Titanove in titanove zlitine lahko pripravimo glede na razlike v lastnostih.

In titanium, titanium alloy, titanium and titanium alloy powder, titanium equipment, zirconium, hafnium, tantalum scale, niobium and other series of direction.
V Titan, zlitine titanium, titana in titanove zlitine v prahu, titana opremo, cirkonij, hafnij, tantal obsega, niobij in druge serije smer.

(7) Titanium and titanium containers generally do not require assessment of impact toughness.
(7) Titanijeve in titanove posode običajno ne zahtevajo ocene udarne žilavosti.

Therefore, the carbon content of the titanium and titanium alloy base material is not more than 0.1%, and the carbon content of the weld does not exceed the carbon content of the base material.
Zato vsebnost ogljika v osnovnem materialu iz titanove in zlitine ne presega 0,1%, vsebnost ogljika v zvari pa ne presega vsebnosti ogljika v osnovnem materialu.

Titanium and titanium alloys are widely used in electroplating production of circuit boards.
Titanove in titanove zlitine se pogosto uporabljajo pri proizvodnji galvaniziranih plošč.

In titanium, titanium alloy, titanium and titanium alloy powder, titanium equipment, formed the scale of zirconium and hafnium tantalum, niobium, etc. series of direction.
Titan, zlitine titanium, titana in titanove zlitine v prahu, oprema Titanium, nastala obsegacirkonij in hafnij tantal, niobij, itd vrsto smeri.

Titanium and titanium alloy has good corrosion resistance, titanium non-toxic, non-magnetic, is a good choice of medical equipment materials.
Titana in titanovih zlitin so dobra korozijska odpornost, Titan je non-strupen, niso magnetni, je dober izbor medicinskih pripomočkov.

Straumann dental implants are made of titanium and titanium alloys, which are characterizes by high strength, small weight and excellent resistance from corrosion which has contributed to a wide and varied use of Straumann implants in highly demanding restorative medical procedures.
Straumann zobni implantati si izdelani iz titana in titanskih zlitin, ki se odlikujejo po veliki trdnosti, majhni teži in izredni odpornosti na korozijo, kar je prispevalo k široki in raznovrstni uporabi pri visoko zahtevnih restorativnih medicinskih posegih.

Titanium and titanium alloys have good corrosion resistance, titanium is non-toxic, non magnetic, is a good selection of medical devices.
Titanove in titanove zlitine imata dobro odpornost proti koroziji, titan pa ni strupen in ni magneten, zaradi česar je dobra izbira za medicinske pripomočke.

Titanium and titanium alloys have good corrosion resistance, and titanium is non-toxic and non-magnetic, making it a good choice for medical devices.
Titana in titanovih zlitin so dobra korozijska odpornost, Titan je non-strupen, niso magnetni, je dober izbor medicinskih pripomočkov.

Titanium and titanium alloys have good corrosion resistance, and titanium is non-toxic and non-magnetic, making it a good choice for medical devices.
Titanove in titanove zlitine imata dobro odpornost proti koroziji, titan pa ni strupen in ni magneten, zaradi česar je dobra izbira za medicinske pripomočke.

Titanium and titanium alloy pipeline installation of titanium and titanium alloy pipe transport and storage should pay attention not to contact with iron materials, collision.
Namestitev plinovodov iz titana in titanovih zlitin Prevoz in shranjevanje cevi iz titanove zlitine morajo biti pozorni, da ne pridejo v stik z železnimi materiali, trkom.

Titanium and titanium alloy bar chemical composition should be consistent with GB/ T 3620.1, the provisions of the need to repeat the time, the chemical composition of the allowable deviation should be consistent with the provisions of GB/ T 3620.2.
Kemična sestava titana in zlitine vrat titanovega morajo biti skladne z GB/ T 3620.1, določili potrebo večkrat preskusom mora kemična sestava odstopanje dovoli, da izpolnjujejo določbe GB/ T 3620.2.

Titanium and titanium alloy bar chemical composition should be consistent with GB/ T 3620.1, the provisions of the need to repeat the time, the chemical composition of the allowable deviation should be consistent with the provisions of GB/ T 3620.2.
Kemična sestava palice titana in titana mora biti v skladu z GB/ T 3620.1, določbe kupca o ponovnem pregledu, kemična sestava odstopanja bi morala biti dovoljena, da izpolnjuje določbe GB/ T 3620.2.

At present, titanium and titanium alloys have been widely used in artificial bone joints, artificial bones, joint foot plates, broken bone fixators, intramedullary nails, artificial heart valves, and cranial bones.
Trenutno se titanove in titanove zlitine pogosto uporabljajo v umetnih kostnih sklepih, umetnih kosteh, sklepnih ploščicah, zlomljenih kostnih fiksatorjih, intramedularnih nohtih, umetnih srčnih ventilih in kranialnih kosteh.

Titanium and titanium alloys are ideal for artificial joint materials because of their small specific gravity(similar to the specific gravity of human bone), high strength, good mechanical processing and excellent corrosion resistance.
Titanove in titanove zlitine so zaradi majhne specifične teže(podobne specifični teži človeške kosti) idealne za umetne materiale v sklepih, visoko trdnost, dobro mehansko obdelavo in odlično odpornost proti koroziji.

The cutting of titanium and titanium alloy pipe should adopt mechanical method, the cutting speed should be low, the special grinding wheel should be used when cutting or grinding titanium pipe with grinding wheel, and the flame cutting should not be used.
Rezanje cevi iz titana in titanove zlitine je treba uporabljati mehansko, rezanje mora biti pri nizki hitrosti; Ko je brusilno kolo iz titana razrezano ali popravljeno, je treba uporabiti poseben kos brusnega kolesa.

Titanium and titanium alloys are not only important applications in the aerospace and space navigation industries, but have also been widely used in many industrial sectors such as chemical, petroleum, light industry, metallurgy, and power generation.
Titanove in titanove zlitine niso samo pomembne aplikacije v vesoljski in vesoljski navigacijski industriji, ampak se pogosto uporabljajo tudi v mnogih industrijskih sektorjih, kot so kemična, naftna, lahka industrija, metalurgija in proizvodnja električne energije.