Examples of using IDE interface in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Compatible with SATA and IDE interface.
Total 4 SATA ports and IDE interface support for multiplex connectivity.
Added support for various other IDE interfaces.
Support USB2.0 to IDE interface, transfer rate up to 480Mb/sec 3.
Easy USB programming via Arduino IDE interface.
If the IDE interface is disabled on your computer, you will need to enable it.
It is sold with 4 fixing screws and offers an IDE interface.
I own an IDE interface hard drive from which I lost my vital files.
You will need the following components to make the IDE interface.
On IDE interfaces there is usually a small jumper that you place over 2 adjacent pins.
Adapter 2.5"/ 3.5" SATA HDD into standard 3.5" 40-pin IDE interface.
Typical Scenario 1:You have a PC with an IDE interface installed, you have Windows Vista or XP and you have nothing installed on the secondary IDE port.
Thanks must go here to Pera Putnik,who designed the original"simple" IDE interface;
Typical Scenario 2:You have a PC with an IDE interface installed, you have Windows Vista or XP the primary IDE port already has two devices connected and you have a CD-ROM installed on the secondary IDE port.
Supports data recovery from hard drive with SATA, SCSI and IDE interfaces.
The A4000T was the only Amiga ever to have both SCSI and IDE interfaces built-in on the motherboard.
ATAPI(ATA Packet Interface)- A standard for connecting peripheral devices such as CD-R drives andtape drives to a computer's IDE interface.
The Cable Select jumper position sets the PX-850A drive to use the CSEL signal from the IDE interface for configuration purposes.
Just launching HDToolbox should partition the IDE disk of the onboard IDE interface.
Set the PX-850A'smode jumper to CSEL, and connect the drive to the end of the cable from the computer's IDE interface connector.
Model PX-850A requires an IDE ATA interface.
Host Transfer Rate for IDE standard interface: 133MB/s.