Examples of using Automatic cycles in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Automatic cycles are preset.
This light is illuminated during automatic cycles.
There are 6 Automatic Cycles to choose from.
Change the dryness level setting on Automatic Cycles.
Do not use automatic cycles with the drying rack.
NOTE: Time is not adjustable for Automatic Cycles.
Automatic cycles do not work with the drying rack.
This option can only be used with the Automatic cycles.
Automatic Cycles give the best drying in the shortest time.
The dryer rack cannot be used with Automatic Cycles.
Automatic cycles automatically determine fabric dryness.
Here's your ultra-modern dishwasher with six automatic cycles.
NO HEAT Automatic cycles automatically determine fabric dryness.
You may select dryness level for Automatic Cycles.
Use the automatic cycles for drying items that can be dried with heat.
Temperature settings cannot be used with the Automatic Cycles.
The other Automatic Cycles will retain the Extra Care setting.
Cleanability of the entire CIP installation with automatic cycles.
The other Automatic Cycles will retain the WRINKLE SHIELD™ setting.
If room temperature is below 7º C(45º F), automatic cycles may not shut off.
Automatic Cycles utilize this information along with air temperature readings to complete the dry cycle at the proper time.
Room temperature above 45 F: If room temperature is below 45 F, automatic cycles may not shut off.
Made-to-measure” automatic cycles With its new automatic type-B cycles, Lisa brings advantages all round: adaptation and reduction of the cycle time according to the number and type of instruments to be sterilized and shortened drying through the patented ECO-Dry system.
When lock-out is used,the operator can use only the factoryset Automatic cycles and the one Custom cycle allowed per Select pad.
Do not use the automatic cycle with the dryer rack.
In serial production the moulds are filled in automatic cycle.
Automatic cycle programs that reproduce configurable accelerations according to use.
To make changes during an Automatic Cycle:• Press STOP once.