Examples of using Configuration command in English and their translations into Spanish
{-}
-
Colloquial
-
Official
For example, in the configuration command.
Enter configuration commands, one per line.
This can be done by using this configuration command.
Enter configuration commands, one per line.
Global connections take longer to route. Configuration Command.
Zone violated/ configuration command being typed in.
See your modem documentation for exact configuration command syntax.
Copy the configuration commands into a text editor.
The Cisco IOS software accepts one configuration command per line.
This is the configuration command to load the new PDLM.
In operation mode,list the configuration commands.
The device configuration command, devfsadm, installs the device policy.
Releasing the button sends a panel configuration command blue led flashing.
In order to directly redistribute connected routes, use the redistribute connected router configuration command.
The camera confirms configuration commands with an SMS.
Management security restricts access to critical configuration commands;
List of basic network configuration commands with ifupdown.
Information is presented in fewer data points- loss of resolution. Configuration Command.
Therefore, the two batch configuration commands are useful.
Reexecutes the configuration commands located in the startup configuration file.
This allows you to use the AP LWAPP static configuration commands again.
If you are searching the configuration command for martini vpls, please refer the below.
Therefore, this scheduler requires no configuration commands for activation.
After you run a configuration command and press Enter, the configuration immediately takes effect.
The federated repository configuration command to permit this is.
Direct access to configuration commands in the authoring applications.
Generally, the batch port configuration command is seldom used.
The network operator uses configuration commands to specify how the summarization occurs.
In order to view sample configuration commands, refer to Configuring HSRP.
Supported data gathering and configuration commands are listed in the following tables.