Examples of using Connection terminals in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Depth 140 mm including the connection terminals.
Connection terminals also accessible from the outside.
DIN rail. Depth 60 mm including the connection terminals.
Speaker connection terminals channels 1 and.
Output X X represents one of the connection terminals A, B or D.
It includes connection terminals, indication Leds and P.I.P.
There are enough screws for wiring connection terminals.
It includes connection terminals, indication Leds and P.I.P.
Enough screws are provided for wiring connection terminals.
Connect the connection terminals with the correct polarity.
Never create a short-circuit between the batteries and connection terminals of the device.
Direct access to connection terminals for adequate tightening.
Protection category The measuring insert itself, with its open connection terminals, is unprotected.
System connection terminals:+,-: power supply(18 Vdc). +12: 12 Vdc output.
Suction and pressure-side supply connection terminals for 1/2" hoses.
Connection terminals to solid copper loudspeakers of high purity.
Connect the devices to the connection terminals at the rear panel.1.
CRIC connection terminals with perfect tightening resistant to vibrations.
C2._.0 Limit Switch X X stands for one of the connection terminals A, B, C or D C2._.1 Measurement Select.
The connection terminals are secured against incorrect connection. .
B1._ Current Output X Simulation X[X stands for one of the connection terminals A, B, C or D] Sequence and settings similar to B1.1, see above!
Connection terminals B+B1 are not occupied for these devices or are available for additional functions.
This way you will get to the connection terminals and to the holes for the assembly.
Connection terminals M.O.H. for the tuner output signal(can only be used with the tuner inserted) 19.
Another method is to measure the temperature of the connection terminals of the reader- Tref of the cold junction temperature- to which the thermocouple is connected.
It incorporates connection terminals and led indicator of work.
They have security connection terminals with a screw to avoid direct contact.
Connect the ELC SmartDriver to connection terminals 2 and 3(see image 2.1) in accordance with the wiring diagram 2.2.
However, as it has protruding connection terminals, it has to be provided with an accessory system of connection, which can be.
Future proof connectivity- due to numerous analog and digital connection terminals including MHL support, network capability as well as optional wireless connectivity.