Examples of using Detection depth in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Detection depth of steel, max. 120 mm.
The preferred multi-detector in its class Detection depth, steel, max. 120 mm.
Detection depth of live cables, max.
Gold 2 has a lower Recovery Speed,which will increase detection depth.
Detection depth of wooden substructures, max.
Variation in coil height at the end of each swing can cause confusing sounds and will reduce detection depth.
Max. detection depth for object localization.
Ground Balance is a variable setting that improves detection depth by reducing noise in mineralised ground.
Detection depth for object localization: 180 mm.
Using the dial on the front of the unit,select the detection depth needed based on the surface being scanned.
Detection depth of copper, max. 80 mm.
A variation in coil height at the end of each swing may also cause confusing sounds and reduce detection depth.
Detection depth of live cables, max.
A lower Recovery Speed, for the same swing rate,will increase detection depth, but may increase noise.
This will increase detection depth and response to small objects.
Super-D coils also have electronic calibration resulting in quieter detecting, andhave excellent detection depth.
This will increase detection depth and improve the response to small objects.
Where possible, keeping the coil in contact with the ground will increase detection depth and sensitivity to very small targets.
This will increase detection depth and improve the response to small objects.
A higher Recovery Speed, for the same swing rate, will help to reject ground noise, butalso decrease detection depth.
However, detection depth also depends upon detector technology and many environmental factors.
The Recovery Speed is relatively high to further reduce unwanted salt-water signals, without greatly sacrificing detection depth.
The laboratory testing showed an increase in detection depth by 41%, about 7 cm(3"), taking a sample of a bronze coin with a diameter of 30 mm.
The measuring tool checks the base material of sensor area 12 in measurement direction A to the max. detection depth see“Technical Data”.
This update also maximises achievable detection depth in any given soil type by delivering improved tracking of the yellow ferrite when ground balancing.
Tracking Ground Balance automatically measures the ground mineralisation and adjusts the Ground Balance as necessary,to maintain stability and detection depth.
With Frequency set to Multi, Field Mode will be the most sensitive to the widestrange of targets and more accurately identify objects at the limits of detection depth, compared to all single frequency options.
Auto ground balance automatically tracks the ground mineralisation levels andadjusts the ground balance as necessary to maintain stability and detection depth.
While using a higher target Recovery Speed may increase the ability of the detector to find difficult targets,it also results in reduced Target ID accuracy and less detection depth.