Examples of using Factory default in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Factory default VRLA jumper installed.
Your Wi-Fi settings will be reset to the factory default.
NOTE: The factory default password is“Password”.
Password-protected system, preset to factory default.
Restore the factory default control bar settings.
People also translate
How to restore JetStream(TM) series switches to factory default.
NOTES: By factory default, this feature is set to ON.
Flash codes for emergency access/Factory Default Reset revised.
The factory default WaterManager setting is HI.
Network settings can be returned to the factory default settings.
ON(factory default) or OFF will flash in the display.
If you ever want to return to the factory default number, press the FLASH button.
Select Factory Default in Installations using and press OK.
Reset Settings Cancel This function resets the Sound settings to factory default.
Enable Mode: Factory Default 30 min, when enabled.
Same as mode 8+ resets installed software images back to factory default.
Restore the factory default response curve on the Fiery server.
Reset: To restore all settings of the player to factory default settings.
The factory default setting for the snooze time is 10 minutes.
Note: Resetting the product to the factory default will erase the current configuration.
Factory Default Restore settings to factory default. .
Note: Resetting the router to factory default will erase the current configuration.
Factory default settings of some functions vary depending on the mode.
And all handsets andbase settings will return to factory default settings.
Restore the factory default control bar settings Fiery Command WorkStation.
Reset Resets the picture settings to factory default settings except Game mode.
The factory default transfer speed for[CARD 1-3] is set to 35mm/s.
The device can be reset entirely by selecting factory default and then restarting.
Slow synchronization SLOW1 SLOW2 SLOW 1st curtain(front curtain)SLOW1 factory default setting.
Communication Parameters(DIP Switch 2) The factory default settings are all OFF.