Examples of using Flashing cursor in English and their translations into Spanish
{-}
-
Colloquial
-
Official
Flashing cursor at the end of Ok.
Press the or to move the flashing cursor.
To move the flashing cursor to enter or edit.
To insert a space,select the flashing cursor“_”.
Move the flashing cursor to set numbers.
To insert a space,select the flashing cursor“_”.
The flashing cursor moves to the next space.
Remember to change the color to choose with or without flashing cursor.
The flashing cursor moves to the next space.
To select a task orfunction from the list a flashing cursor indicates the selection.
Non-stop flashing cursor display in Run-Matrix mode.
Press left or right on the Navigation key(S)to move the flashing cursor in a text message.
A flashing cursor indicates the currently selected parameter seconds.
If you press(2)(N), the flashing cursor moves to the left.
The flashing cursor indicates that a change has taken place but is not saved yet.
You just need a little playbook to fall back on when that blank white page and flashing cursor are screaming in your face.
Press S to move the flashing cursor to enter or edit message text.
Once you have selected the appropriate catalog button and selected the Messier, NGC or SAO catalog,you will see a flashing cursor indicating you are in numeric entry mode.
Select a function a flashing cursor indicates the selected function.
Some displays include variable values(memories M1… M5, charge current, discharge current, battery type, SOUND), and these feature a flashing cursor; the values can then be adjusted using the INC/ DEC buttons.
Press S to move the flashing cursor to enter or edit message text.
A flashing cursor indicates the currently selected parameter(seconds), use the buttons to set the current second.
Should it be necessary to change the programmed value; the arrow key"8" may be used to move the flashing cursor to the digit to be changed, and the Number key"" to make the change.
Press the 5 key 3 times forthe letter L and either press the button to advance the flashing cursor to the next entry point, or wait 2 seconds until the flashing cursor automatically moves to the next entry point.
Current Time Mo 16:48 Should it be necessary to change the programmed value;the arrow key"8" may be used to move the flashing cursor to the digit to be changed, and the Number key"" to make the change.
A value of 0 indicates no cursor flashing.
Cursor flashing at the table when it is my turn to play.
You will see a flashing vertical cursor for the deck which is currently selected.
With the cursor flashing, type in the key commands and then click on the green tick mark.
Use the[SEL] buttons to move the cursor the flashing character or symbol.